作废 GB/T 7957-2017
瓦斯环境用矿灯结构、性能和防爆试验通用要求 瓦斯环境用矿灯结构、性能和防爆试验通用要求 General requirements for construction,performance and explosion protected testing of caplights for use in mines susceptible to firedamp
发布日期:2017-12-29
实施日期:2017-12-29
分类信息
研制信息

归口单位: 全国防爆电气设备标准化技术委员会

起草单位: 中煤科工集团上海研究院、 中煤科工集团沈阳研究院、 中煤科工集团重庆研究院、 南阳防爆电气研究所有限公司、 国家防爆电气产品质量监督检验中心、 济宁高科股份有限公司、 抚顺矿灯总厂、 贵州黔聚源光电科技有限公司、 华荣科技股份有限公司、 济源市华宇矿业电器有限公司

起草人: 臧才运、 许明英、 侯彦东、 王涛、 李方儒、 蒲世元、 廖财明、 侯玉刚、 陈瑞

标准简介

本标准规定了瓦斯环境用矿灯的产品分类、要求、试验方法、检验规则和标志等。本标准适用于煤矿瓦斯环境(I类)用矿灯,包括与其他设备连接和为其他设备供电的矿灯

相似标准/计划/法规
AS/NZS 60079.35.1-2011
Explosive atmospheres, Part 35.1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
爆炸性环境 第35.1部分:易受沼气影响的矿井用顶灯.一般要求.与爆炸风险有关的结构和试验
2011-11-21
IEC 60079-35-1-2011
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion
爆炸性环境 - 第35-1部分:用于易受沼气影响的地雷的烽火灯 - 一般要求 - 与爆炸危险有关的构造和测试
2011-05-26
BS EN 16508-2015
Temporary works equipment. Encapsulation constructions. Performance requirements and general design
临时工程设备 封装结构 性能要求和总体设计
2015-12-31
GB/T 22380.3-2019
燃油加油站防爆安全技术 第3部分:剪切阀结构和性能的安全要求
Explosion protected safety technique of the petrol filling station—Part 3:Safety requirements for construction and performance of shear valves
2019-12-10
GB/T 22380.2-2019
燃油加油站防爆安全技术 第2部分:加油机用安全拉断阀结构和性能的安全要求
Explosion protected safety technique of the petrol filling station—Part 2:Safety requirements for construction and performance of safe breaks for use on dispensers
2019-12-10
BS 12/30272145 DC
BS EN 16508. Temporary works equipment. Encapsulation constructions. Performance requirements and general design
英国标准EN 16508 临时工程设备 封装结构 性能要求和总体设计
2012-12-14
UNE-EN 62013-1-2007
Caplights for use in mines susceptible to firedamp -- Part 1: General requirements - Construction and testing in relation to the risk of explosion (IEC 62013-1:2005)
易受沼气影响的矿井用顶灯第1部分:一般要求与爆炸风险有关的结构和试验(IEC 62013-1-2005)
2007-07-25
BS 09/30214292 DC
BS EN 60079-35-1. Caplights for use in mines susceptible to firedamp. Part 1. General requirements. Construction and testing in relation to the risk of explosion
英国标准EN 60079-35-1 适用于易受沼气影响的矿井 第一部分 一般要求 与爆炸风险相关的施工和测试
2009-12-16
DIN IEC 60079-35-1-DRAFT
Draft Document - Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion (IEC 31/772/CD:2008)
文件草案.易受沼气影响的矿井用灯帽.第1部分:一般要求.与爆炸风险有关的结构和试验(IEC 31/772/CD:2008)
2009-03-01
CAN/CSA C22.2 NO.60079-35-1-16(R2021)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion (Adopted IEC 60079-35-1:2011, first edition, 2011-05, with Canadian deviations)
爆炸性环境.第35-1部分:易受沼气影响的矿井用灯帽.一般要求.与爆炸风险有关的结构和试验(采用IEC 60079-35-1:2011 第一版 2011-05 带加拿大偏差)
2016-08-01
DIN EN 60079-35-1
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011); German version EN 60079-35-1:2011 + Cor. :2011
爆炸性环境.第35-1部分:易受沼气影响的矿井用顶灯.一般要求.与爆炸风险有关的结构和试验(IEC 60079-35-1-2011);德文版EN 60079-35-1:2011+Cor:2011
2012-01-01
DIN EN 62013-1
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion (IEC 62013-1:2005); German version EN 62013-1:2006
易受沼气影响的矿井用顶灯.第1部分:一般要求.与爆炸风险有关的结构和试验(IEC 62013-1-2005);德文版EN 62013-1:2006
2007-02-01
EU 1788-2016
Commission Delegated Regulation (EU) 2016/1788 of 14 July 2016 amending Regulation (EU) No 167/2013 of the European Parliament and of the Council as regards the list of requirements for vehicle EU type-approval, and amending and correcting Commission Delegated Regulations (EU) No 1322/2014, (EU) 2015/96, (EU) 2015/68 and (EU) 2015/208 with regard to vehicle construction and general requirements, to environmental and propulsion unit performance re
2016年7月14日的委员会授权法规(EU)2016/1788修订了欧洲议会和理事会关于车辆EU型式认证要求清单的第167/2013号法规(EU) 并修订和纠正了关于车辆构造和一般要求的委员会授权法规(EU)1322/2014、(EU)2015/96、(EU)2015/68和(EU)2015/208 环境和推进装置性能
2016-07-14
结构环境矿灯瓦斯防爆

最后更新时间 2025-09-06