BS EN ISO 7751-2016
Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
橡胶和塑料软管及软管组件 验证压力和爆破压力与最大工作压力之比
2016-12-31
GB/T 9574-2017
橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure
2017-09-07
ISO 7751-2016
Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure
橡胶和塑料软管和软管组件 - 证明和爆破压力与最大工作压力的比率
2016-10-26
UNE-EN 1734-1997
RUBBER- OR PLASTICS COATED FABRICS. DETERMINATION OF RESISTANCE TO WATER PENETRATION. LOW PRESSURE METHOD.
橡胶或塑料涂层织物 抗水渗透性的测定 低压法
1997-03-06
KS M ISO 6803
고무 또는 플라스틱 호스와 호스 어셈블리 — 비굴곡 유압 충격 시험방법
橡胶或塑料软管和软管组件 - 没有弯曲的液压脉冲测试
2018-12-28
BS EN ISO 6803-2017
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
橡胶或塑料软管和软管组件 无弯曲液压脉冲试验
2017-03-31
BS EN 1734-1997
Rubber- or plastics- coated fabrics. Determination of resistance to water penetration. Low-pressure method
橡胶或塑料涂层织物 抗水渗透性的测定 低压法
1997-05-15
KS M ISO 6803(2023 Confirm)
고무 또는 플라스틱 호스와 호스 어셈블리 — 비굴곡 유압 충격 시험방법
橡胶或塑料软管及软管组件无弯曲液压脉冲试验
2018-12-28
GB/T 5568-2022
橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验
Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing
2022-12-30
GOST ISO 6803-2013
Рукава резиновые или пластиковые и рукава в сборе. Импульсные гидравлические испытания под давлением без изгиба
橡胶和塑料软管和软管组件 液压冲击试验无弯曲
2013-09-27
ISO 6803-2017
Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
橡胶或塑料软管和软管组件 - 没有弯曲的液压脉冲测试
2017-03-02
UNE-EN ISO 7751-1997
RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (ISO 7751:1991).
橡胶和塑料软管及软管组件 验证压力和爆破压力与设计工作压力的比率 （ISO 7751:1991）
1997-07-24
DIN EN ISO 7751
Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
橡胶和塑料软管及软管组件.耐破裂压力与最大工作压力之比（ISO 7751-2016）
2017-06-01
JIS K 6330-8-1998
Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing
橡胶和塑料软管试验方法第8部分:无弯曲液压脉冲试验
1998-01-01
BS 5173-102.8-1987
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Pressure impulse test for rigid helix reinforced thermoplastics hoses
橡胶和塑料软管及软管组件的试验方法 液压试验
1987-04-30
JJF(石化)048-2021
橡胶或塑料软管及软管组合件用无曲挠脉冲试验机校准规范
Calibration Specification for Rubber or Plastics Hoses and Hose Assemblies—Hydraulic-Pressure Impulse Testing Machine Without Flexing
2021-12-02
UNE-EN ISO 6803-2009
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008)
橡胶或塑料软管和软管组件.无弯曲液压脉冲试验（ISO 6803-2008）
2009-03-11
BS 5173-102.4-1990
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Determination of volumetric expansion of hydraulic hoses
橡胶和塑料软管及软管组件的试验方法 液压测试 液压软管体积膨胀的测定
1990-11-30
JB/T 4278.12-2011
橡皮塑料电线电缆试验仪器设备检定方法 第12部分：高温压力试验装置
Verification procedure for test equipment of rubber plastic wire and cable. Part 11：High temperature pressure test device
2011-05-18
BS 5173-102.10-1990
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Hydrostatic tests for oil suction and discharge hose
橡胶和塑料软管及软管组件的试验方法 液压试验
1990-06-29