现行 GB/T 37607-2019
耐蚀合金盘条和丝 耐蚀合金盘条和丝 Corrosion-resistant alloy wire rod and wire
发布日期:2019-06-04
实施日期:2020-05-01
分类信息
研制信息

归口单位: 全国钢标准化技术委员会

起草单位: 马鞍山市宁丹特种合金有限公司、 永嘉县三和弹簧有限公司、 永兴特种不锈钢股份有限公司、 中国航空工业集团公司金城南京机电液压工程研究中心、 南京德邦金属装备工程股份有限公司、 冶金工业信息标准研究院、 丹阳市凯鑫合金材料有限公司、 南京英特安特钢有限公司、 宝钢特钢有限公司、 江苏申源集团有限公司

起草人: 任卫平、 叶隆、 润长生、 任嘉怡、 顾建林、 邓家爱、 孟维冬、 颜丞铭、 陈民敏、 荆正伟、 张道恩、 韩红卫、 李晓冬、 涂玉国、 王书常

标准简介

本标准规定了耐蚀合金盘条和丝的牌号、尺寸、外形、技术要求、试验方法、检验规则、包装、标志和质量证明书等。本标准适用于公称直径4.5 mm~18.0 mm的耐蚀合金盘条和公称直径0.10 mm ~16.0 mm的耐蚀合金冷拉(拔)丝(以下简称合金材),其他规格也可参照执行

相似标准/计划/法规
GB/T 38589-2020
耐蚀合金棒材、盘条及丝材通用技术条件
General technical requirements of corrosion-resistant alloy bars,wire rods and wires
2020-03-06
GB/T 37612-2019
耐蚀合金焊丝
Corrosion-resistant alloy wires for welding
2019-06-04
JIS H 4670-2016
Titanium and titanium alloys -- Wires and wire rods
钛及钛合金线材和线材
2016-01-01
GB/T 33964-2017
耐候钢实心焊丝用钢盘条
Wire rods for welding solid electrodes of atmospheric corrosion resisting steels
2017-07-12
SAE AMS5819A
Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire, 62Co - 27 Cr - 2.9Ni - 5.5Mo
钴合金 耐腐蚀和耐热 耐磨的杆和线62Co - 27Cr - 2.9Ni - 5.5Mo
2001-11-20
SAE AMS5788G
Cobalt Alloy, Corrosion- and Heat-Resistant, Hard Facing Rods and Wire, 62Co - 29Cr - 4.5W - 1.2C
钴合金 耐腐蚀和耐热 硬面棒和线62Co - 29Cr - 4.5W - 1.2C
2018-06-15
BS EN ISO 16120-4-2017
Non-alloy steel wire rod for conversion to wire-Specific requirements for wire rod for special applications
非合金钢线材 用于转换成线材
2017-08-16
BS EN ISO 16120-2-2017
Non-alloy steel wire rod for conversion to wire-Specific requirements for general purpose wire rod
非合金钢线材 用于转换成线材
2017-02-28
GOST 18143-1972
Проволока из высоколегированной коррозионностойкой и жаростойкой стали. Технические условия
高合金耐腐蚀和耐热钢丝 规格
GB/T 10858-2023
铝及铝合金焊丝
Wire electrodes,wires and rods for welding of aluminium and aluminium alloys
2023-09-07
YS/T 696-2015
镁合金焊丝
Magnesium alloy welding rods and wires
2015-04-30
GB/T 24242.4-2020
制丝用非合金钢盘条 第4部分:特殊用途盘条
Non-alloy steel wire rod for conversion to wire —Part 4:Specific requirements for special purpose wire rod
2020-09-29
GB/T 24242.2-2020
制丝用非合金钢盘条 第2部分:一般用途盘条
Non-alloy steel wire rod for conversion to wire —Part 2:Specific requirements for general purpose wire rod
2020-09-29
ISO 16120-2-2017
Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod
用于转换线的非合金钢丝杆 - 第2部分:通用线材的特殊要求
2017-02-14
ISO 16120-4-2017
Non-alloy steel wire rod for conversion to wire — Part 4: Specific requirements for wire rod for special applications
用于转换为电线的非合金钢线材 - 第4部分:专用线材的特殊要求
2017-05-04
BS EN ISO 16120-1-2017
Non-alloy steel wire rod for conversion to wire-General requirements
非合金钢线材 用于转换成线材
2017-08-04
SAE AMS5676G
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire, 80Ni - 20Cr
镍合金 耐腐蚀和耐热 焊丝80Ni - 20Cr
2022-11-02
SAE AMS5683G
Alloy Welding Wire, Corrosion and Heat Resistant 75Ni - 15.5Cr - 8.0Fe
合金焊丝 耐腐蚀和耐热 75Ni - 15.5Cr - 8.0Fe
2017-04-03
GB/T 37609-2019
耐蚀合金焊带和焊丝通用技术条件
General technical requirements of corrosion-resistant alloy strips and wires for welding
2019-06-04
JIS G 4311-2019
Heat-resistant steel bars and wire rods
耐热钢筋和线材
2019-01-01
合金耐蚀盘条

最后更新时间 2025-09-06