Steels -- Determination of depth of decarburization
钢脱碳深度的测定
2020-01-01
ISO 3887-2023
Steels — Determination of the depth of decarburization
钢脱碳深度的测定
2023-09-22
UNE-EN ISO 3887-2005
Steels - Determination of depth of decarburization (ISO 3887:2003)
钢脱碳深度的测定
2005-07-20
KS D 0216(2020 Confirm)
강의 탈탄층 깊이 측정 방법
钢之脱碳层深度测定法
2001-11-06
JB/T 7362-2007
滚动轴承 零件脱碳层深度测定法
Rolling bearings--Determination of decarburized depth for parts
2007-03-06
ASTM E1077-14(2021)
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
估算钢试样脱碳深度的标准试验方法
2021-06-01
GOST R 54566-2011
Сталь. Стандартные методы испытаний для оценки глубины обезуглероженного слоя
钢 用于估算脱碳层深度的标准试验方法
SAE ARP1341C
Determining Decarburization and Carburization in Finished Parts of Carbon and Low-Alloy Steels
确定碳素和低合金钢成品中的脱碳和渗碳
2024-01-22
GOST 1763-1968
Сталь. Методы определения глубины обезуглероженного слоя
钢 脱碳层深度测定方法
GB/T 9450-2005
钢件渗碳淬火硬化层深度的测定和校核
Steels-Determination and verification of the depth of carburized and hardened cases
2005-07-21
KS D 0215(2020 Confirm)
침탄 경화된 강의 유효 경화층 깊이 측정 및 검증 방법
钢测定及渗碳和硬化的情况下有效深度的核查
2000-12-30
JIS G 0559-2019
Steel -- Determination of case depth after flame hardening or induction hardening
钢火焰淬火或感应淬火后表面深度的测定
2019-01-01
UNE-EN 10328-2007
Iron and steel - Determination of the conventional depth of hardening after surface heating
钢铁.表面加热后常规硬化深度的测定
2007-01-24
GB/T 5617-2005
钢的感应淬火或火焰淬火后有效硬化层深度的测定
Determination of effective depth of hardening after induction or flame hardening of steel
2005-07-21
ASTM F2328-17(2022)
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
测定硬化和回火螺纹钢螺栓、螺钉、螺柱和螺母中脱碳和渗碳的标准试验方法
2022-08-01
UNE-EN ISO 2639-2004
Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002)
钢.渗碳和硬化层深度的测定和验证（ISO 2639-2002）
2004-02-13
GB/T 11354-2005
钢铁零件 渗氮层深度测定和金相组织检验
Determination of nitrided case depth and metallographic microstructure examination for steel iron parts
2005-07-21
ASTM F2328M-17(2022)
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
测定硬化和回火螺纹钢螺栓、螺钉、螺柱和螺母脱碳和渗碳的标准试验方法（米制）