现行 GB/T 38514-2020
电去离子膜堆测试方法 电去离子膜堆测试方法 Test methods for electrodeionization stacks
发布日期:2020-03-06
实施日期:2021-02-01
分类信息
研制信息

归口单位: 全国分离膜标准化技术委员会

起草单位: 中国人民解放军军事科学院系统工程研究院卫勤保障技术研究所、 北京中扬永康环保科技有限公司、 浙江东大环境工程有限公司、 南开大学、 天津中领水系统技术有限公司、 杭州安诺过滤器材有限公司、 天津锐纯科技有限公司、 合肥科佳高分子材料科技有限公司、 天津膜天膜工程技术有限公司

起草人: 刘红斌、 马军、 盛青、 金王勇、 王建友、 李琪、 张俊伟、 陈清华、 汪耀明、 王瀚漪

标准简介

本标准规定了电去离子膜堆(以下简称“膜堆”)测试的条件、装置、项目、步骤、数据处理和报告。本标准适用于生产纯水、高纯水的膜堆性能的测试

相似标准/计划/法规
GB/T 38514-2020
Test methods for electrodeionization stacks
2020-03-06
GB/T 21574-2008
危险品 堆垛试验方法
Dangerous goods - Stack test method
2008-04-01
ASTM E1822-21
Standard Test Method for Fire Testing of Stacked Chairs
叠层椅子防火试验的标准试验方法
2021-11-15
GH/T 1099-2014
籽棉垛温湿度测试方法
Testing method for temperature and humidity of seedcotton stack
2014-10-27
GB/T 21593-2008
危险品 包装堆码试验方法
Dangerous goods - Test method for stacking of packaging
2008-04-01
ASTM D6831-11(2018)
Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
使用堆叠式 惯性微量天平采样和确定堆积气体中的颗粒物的标准测试方法
2018-04-15
GB/T 21583-2008
危险品 大包装堆码试验方法
Dangerous goods - Test method for stacking of large packaging
2008-04-01
YS/T 23-2016
硅外延层厚度测定 堆垛层错尺寸法
Test method for thickness of epitaxial layers—Stacking fault size
2016-04-05
ASTM D6529-22
Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
50 μS/cm至1000μS/cm
2022-10-01
T/ZHFCA 1019-2025
固体氧化物电解池 电解堆测试方法
Solid oxide electrolysis cells— Performance test methods for electrolysis stacks
2025-07-23
NB/T 42132-2017
全钒液流电池 电堆测试方法
Vanadium flow battery-Test method for vanadium flow battery stacks
2017-11-15
GB/T 21590-2008
危险品 中型散装容器堆码试验方法
Dangerous goods - Test method for stacking of intermediate bulk containers (IBCs)
2008-04-01
ASTM D3685/D3685M-13(2021)
Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
烟道气中颗粒物取样和测定的标准试验方法
2021-09-01
AS 2582.3-2003
Complete, filled transport packages - Methods of test, Method 3: Stacking tests using a static load
完整的、装满的运输包装.试验方法 方法3:使用静载荷的堆叠试验
2003-11-27
BS EN 22874-1993
Complete, filled transport packages. Method of test for stacking using compression tester
完整的、装满的运输包裹 用压缩试验机进行堆叠的试验方法
1986-07-31
GB/T 31035-2014
质子交换膜燃料电池电堆低温特性试验方法
Test methods for proton exchange membrane fuel cell stack at subzero environment
2014-12-05
ASTM D6807-17
Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 μS/cm
2到100μ的反渗透渗透渗透物上连续电去离子系统操作性能的标准试验方法;S/cm
2017-12-15
AS 2582.10-2003
Complete, filled transport packages - Methods of test, Method 10: Compression and stacking tests using a compression tester
装满的完整运输包装.试验方法 方法10:使用压缩试验机的压缩和堆叠试验
2003-11-27
T/CRES 0038-2025
平板式固体氧化物燃料电池电池堆通用技术要求与试验方法
General technical requirements and testing methods for planar solid oxide fuel cell stack
2025-07-17
NB/T 10460-2020
锌镍液流电池 电堆测试方法
Zinc-nickle flow battery-Test method for zinc-nickle flow battery stacks
2020-10-23
离子测试方法

最后更新时间 2025-09-07