现行 GB/T 41501-2022
纤维增强塑料复合材料 双梁法测定层间剪切强度和模量 纤维增强塑料复合材料 双梁法测定层间剪切强度和模量 Fibre-reinforced plastic composites—Determination of interlaminar strength and modulus by double beam shear test
发布日期:2022-04-15
实施日期:2022-11-01
分类信息
研制信息

归口单位: 全国纤维增强塑料标准化技术委员会

起草单位: 北京玻璃钢研究设计院有限公司、 中国航发北京航空材料研究院、 武汉理工大学、 常州市宏发纵横新材料科技股份有限公司、 南京航空航天大学、 北京玻钢院检测中心有限公司、 江苏恒神股份有限公司、 双一科技盐城有限公司、 威海拓展纤维有限公司、 浙江恒石纤维基业有限公司、 常州达姆斯检测技术有限公司

起草人: 王占东、 田垚暐、 朱四荣、 谈昆伦、 陶杰、 彭兴财、 薛鹏、 孙双宝、 相文航、 刘连学、 谈源

标准简介

本文件规定了用双梁法(DBS)测定纤维增强塑料复合材料的层间剪切强度和层间剪切模量本文件适用于能发生可接受层间剪切失效的玻璃纤维或碳纤维增强热固性塑料复合材料。本文件仅适用于具有对称和均衡铺层的层合板,以避免试验结果受到弯曲/扭转或弯曲/拉伸耦合变形的影响(见6.2)。本文件尤其适用于纤维沿试样长度方向(轴向)排列的单向层合板。对于具有特定铺层、基体和纤维(例如天然纤维)的层合板,需评估分层失效性来判定是否适用于本文件

相似标准/计划/法规
GB/T 1450.1-2005
纤维增强塑料层间剪切强度试验方法
Fibre-reinforced plastic composites-Determination of interlaminar shear strength
2005-05-18
KS M ISO 14130(2017 Confirm)
섬유 강화 플라스틱 복합 재료-단봉법에 의한 겉보기 층간 전단 강도의 측정
纤维增强塑料复合材料短梁法测定表观层间剪切强度
2012-12-24
BS ISO 19927-2018
Fibre-reinforced plastic composites. Determination of interlaminar strength and modulus by double beam shear test
纤维增强塑料复合材料 用双梁剪切试验测定层间强度和模量
2018-08-14
BS EN ISO 14130-1998
Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method
纤维增强塑料复合材料 用短梁法测定表观层间剪切强度
2004-05-07
KS M ISO 14130(2022 Confirm)
섬유 강화 플라스틱 복합 재료-단봉법에 의한 겉보기 층간 전단 강도의 측정
纤维增强塑料复合材料-用短梁法测定表观层间剪切强度
2012-12-24
JC/T 773-2010
纤维增强塑料 短梁法测定层间剪切强度
Fibre-reinforced plastics composites—Determination of apparent interlaminar shear strength by short-beam method
2010-11-10
ISO 14130-1997
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method
纤维增强塑料复合材料——用短梁法测定表观层间剪切强度
1997-12-11
ISO 19927-2018
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus by double beam shear test
纤维增强塑料复合材料 - 双梁切割试验确定层间强度和模量
2018-08-13
ISO 15024-2023
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
纤维增强塑料复合材料.单向增强材料的I型层间断裂韧性的测定
2023-02-27
UNE-EN ISO 14130-1999
FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD. (ISO 14130:1997).
纤维增强塑料复合材料 用短梁法测定表观层间剪切强度 (ISO 14130:1997)
1999-02-01
DIN 65148
Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test
航空航天纤维增强塑料的试验;用拉伸试验测定层间剪切强度
1986-11-01
BS EN 2563-1997
Carbon fibre reinforced plastics. Unidirectional laminates. Determination of the apparent interlaminar shear strength
碳纤维增强塑料 单向层压板 表观层间剪切强度的测定
1997-06-15
KS M ISO 14125(2017 Confirm)
섬유 강화 플라스틱 복합 재료-굴곡 물성의 측정
纤维增强塑料复合材料弯曲性能的测定
2012-12-24
BS EN ISO 14125-1998+A1-2011
Fibre-reinforced plastic composites. Determination of flexural properties
纤维增强塑料复合材料 弯曲性能的测定
2011-07-31
KS M ISO 14125(2022 Confirm)
섬유 강화 플라스틱 복합 재료-굴곡 물성의 측정
纤维增强塑料复合材料弯曲性能的测定
2012-12-24
GB/T 1449-2005
纤维增强塑料弯曲性能试验方法
Fibre-reinforced plastic composites-Determination of flexural properties
2005-05-18
ISO 14125-1998
Fibre-reinforced plastic composites — Determination of flexural properties
纤维增强塑料复合材料——弯曲性能的测定
1998-04-02
BS EN 2377-1989
Specification for glass fibre reinforced plastics. Test method. Determination of apparent interlaminar shear strength
玻璃纤维增强塑料规范 测试方法 表观层间剪切强度的测定
1989-11-30
BS ISO 12815-2013
Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
纤维增强塑料复合材料 平销轴承强度的测定
2013-04-30
UNE-EN 2563-1997
AEROSPACE SERIES. CARBONE FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. DETERMINATION OF THE APPARENT INTERLAMINAR SHEAR STRENGTH.
航空航天系列 碳纤维增强塑料 单向层压板 表观层间剪切强度的测定
1997-07-24
复合材料塑料剪切强度纤维

最后更新时间 2025-09-07