ASTM C393/C393M-20
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
梁弯曲夹心结构的芯剪切性能的标准试验方法
2020-07-01
ASTM C273/C273M-20
Standard Test Method for Shear Properties of Sandwich Core Materials
夹层芯材剪切性能的标准试验方法
2020-02-15
GB/T 1453-2022
夹层结构或芯子平压性能试验方法
Test method for flatwise compression properties of sandwich constructions or cores
2022-04-15
GB/T 1464-2024
夹层结构或芯子密度试验方法
Test method for density of sandwich construction or cores
2024-03-15
ASTM C394/C394M-16(2024)
Standard Test Method for Shear Fatigue of Sandwich Core Materials
夹层芯材剪切疲劳的标准试验方法
2024-05-01
SAE AMSSTD401
Sandwich Constructions and Core Materials: General Test Methods
三明治建筑和核心材料 - 一般测试方法
1999-06-01
GB/T 14207-2024
夹层结构或芯子吸水性试验方法
Test method for water absorption of sandwich constructions or cores
2024-04-25
GB/T 1456-2021
夹层结构弯曲性能试验方法
Test method for flexural properties of sandwich constructions
2021-12-31
GOST R 57049-2016
Композиты полимерные. Метод определения усталости при сдвиге материалов внутреннего слоя «сэндвич»-конструкций
聚合物复合材料 夹芯材料剪切疲劳试验方法
ASTM C365/C365M-22
Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
夹层芯材平面压缩性能的标准试验方法
2022-05-01
GB/T 1454-2021
夹层结构侧压性能试验方法
Test method for edgewise compressive properties of sandwich constructions
2021-03-09
ASTM C272/C272M-18(2024)
Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
夹层结构芯材吸水率的标准试验方法
2024-08-01
ASTM D7336/D7336M-22
Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
蜂窝夹芯材料静态能量吸收性能的标准试验方法
2022-05-01
ASTM D7249/D7249M-20
Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
用长梁挠曲法测定三明治结构表面性能的标准试验方法
2020-02-01
ASTM D3164-03(2025)
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
通过张力加载剪切粘合的塑料夹层三明治接头的强度性能的标准测试方法
2025-02-01
ASTM D8067/D8067M-17
Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
使用相框夹具的三明治板的平面剪切性能的标准测试方法
2017-01-01
JC/T 778-2010
玻璃纤维增强塑料板材和蜂窝夹层结构弯曲蠕变试验方法
Test method for flexural creep of glass fibre reinforced plastics sheet and sandwich construction with honeycomb core
2010-11-10
ASTM D906-20
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
胶合板类型结构中通过张力加载剪切的粘合剂的强度性能的标准测试方法
2020-04-01
MIL MIL-STD-401B
SANDWICH CONSTRUCTIONS AND CORE MATERIALS, GENERAL TEST METHODS (SUPERSEDING MIL-STD-401A) (S/S BY SAE-AMS-STD-401)
夹层结构和芯材 通用试验方法（代替MIL-STD-401A）（由SAE-AMS-STD-401提供）
1967-09-26
MIL MIL-STD-401B Notice 1-Cancellation
SANDWICH CONSTRUCTIONS AND CORE MATERIALS, GENERAL TEST METHODS (SUPERSEDING MIL-STD-401A) (S/S BY SAE-AMS-STD-401)
夹层结构和芯材通用试验方法（代替MIL-STD-401A）
1999-09-24