BS ISO 7689-2008
Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification
航空航天合金钢制MJ螺纹螺栓 强度等级1100 MPa 采购规范
2008-12-31
DIN ISO 9152
Aerospace - Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa - Procurement specification (ISO 9152:1998)
航空航天.强度等级为1100MPa的钛合金MJ螺纹螺栓.采购规范（ISO 9152-1998）
2005-11-01
DIN 65330
Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
航空航天钢制短螺纹MJ螺纹六角螺栓；温度高达235°C时的标称抗拉强度为1100 MPa
1987-08-01
BS ISO 9255-2008
Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天螺栓 标准花键头 标准柄 短或中等长度MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
2008-09-30
DIN 65527
Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C
航空航天温度高达235°C的标称抗拉强度1100 MPa钢制短螺纹MJ螺纹紧公差六角螺栓
1984-07-01
DIN 65115
Aerospace; hexagon bolts with waisted shank and MJ thread, steel nominal tensile strength 1100 MPa, for temperatures up to 235 °C
航空航天钢制腰杆MJ螺纹六角螺栓标称抗拉强度1100 MPa 适用于235°C以下温度
1986-05-01
SAE AS65300-1
AS65300 Bolt, 100° Countersunk Head, Spiral Drive, MJ Thread, Split Pin Hole Option, Titanium Alloy (1100 MPa, 315°C)
AS65300螺栓 100°沉头 螺旋传动 MJ螺纹 开口销孔选件 钛合金（1100 MPa 315°C）
2013-07-30
DIN 65555
Aerospace; hexagon bolts with short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天耐腐蚀钢制短MJ螺纹六角螺栓；温度高达425°C时的标称抗拉强度为1100 MPa
1987-08-01
DIN 65177
Aerospace; hexagon bolts with waisted shank and MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperature up to 315 °C
航空航天钛合金腰杆MJ螺纹六角螺栓 标称抗拉强度1100 MPa 适用于315℃以下
1986-05-01
DIN 65515
Aerospace; cheese head bolts, with internal serration and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金短螺纹内锯齿和MJ螺纹圆柱头螺栓 标称抗拉强度1100 MPa 适用于315°C以下温度
1984-07-01
DIN 65438
Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, short thread length, in titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金制短螺纹MJ螺纹紧公差双六角头螺栓；温度高达315°C时的标称抗拉强度为1100 MPa
1993-12-01
BS +A 307-1994
Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓 标准花键头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
1994-08-15
DIN 65518
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金短螺纹带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于315℃以下的温度
1984-07-01
DIN 65313
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓；全螺纹耐腐蚀钢；温度高达425°C时的标称抗拉强度为1100 MPa
1987-08-01
BS ISO 3193-2008
Aerospace. Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天螺栓 标准六角头 标准柄 短或中等长度MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
2008-09-30
KS W ISO 9255(2020 Confirm)
항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 섕크, 짧은 길이 또는 중간 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层的金属材料短或中长MJ螺纹标准花键头标准柄螺栓－尺寸
2005-12-22
DIN 65554
Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天耐腐蚀钢制带肋TORQ-SET（ACR）凹槽和短长度MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于425°C以下的温度
1987-12-01
KS W ISO 9254(2020 Confirm)
항공 우주－강도 등급 1 100 MPa 이하, 금속재, 코팅한 또는 코팅하지 않은, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的金属材料 有涂层或无涂层 长MJ螺纹 标准花键头 标准或中径柄螺栓－尺寸
2005-12-22
ISO 9254-1993
Aerospace — Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓 标准花键头 标准或中径杆 长MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa——尺寸
1993-12-23
BS 05/30128695 DC
ISO 9255. Aerospace. Bolts, normal spline head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
ISO 9255 航空航天螺栓 标准花键头 标准柄 短或中等长度MJ螺纹 金属材料 有涂层或无涂层 强度等级小于或等于1100 MPa 尺寸
2005-02-02