ISO 6149-1-2022
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
液压传动和通用连接件.ISO 261米制螺纹和O形密封圈的端口和螺柱端.第1部分:O形密封圈用带截短外壳的端口
2022-06-13
SAE J2244/1_200712
Connections for Fluid Power and General Use--Ports and Stud Ends With ISO 261 Threads and O-Ring Sealing Part 1: Port with O-Ring Seal in Truncated Housing
用于流体动力和一般用途的连接 - 带Iso 261螺纹和O形密封件的端口和螺栓端 - 第1部分:带有O形圈密封的端口在截断外壳
2007-12-21
ISO 11926-1-1995
Connections for general use and fluid power — Ports and stud ends with ISO 725 threads and O-ring sealing — Part 1: Ports with O-ring seal in truncated housing
通用和流体动力连接件——带ISO 725螺纹和O形密封圈的端口和螺柱端第1部分:截断壳体中带O形密封圈的端口
1995-04-20
SAE J1926/1_202301
Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing
一般用途和流体动力连接 - 带ASME B1.1螺纹和O型密封圈的端口和螺栓端 - 第1部分:截止外壳中带有O形密封圈的螺纹端口
2023-01-17
UNE-EN ISO 6149-1-2008
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)
液压传动和一般用途的连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第1部分:带O形密封圈的截断壳体的端口（ISO 6149-1-2006）
2008-10-01
SAE J1298_201704
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations
流体动力和通用连接 - 液压联轴器 - 诊断端口尺寸和位置
2017-04-14
BS 09/30199057 DC
BS ISO 11926-1. Connections for general use and fluid power. Ports and stud ends with ISO 263 UN and UNF threads and O-ring sealing. Part 1. Ports with truncated housing for O-ring seal
BS ISO 11926-1 一般用途和流体动力的连接 端口和螺柱端部采用ISO 263 UN和UNF螺纹和O形密封圈 第一部分 O形密封圈用带截断外壳的端口
2009-05-07
GB/T 43077.4-2023
液压传动连接 普通螺纹平油口和螺柱端 第4部分：六角螺塞
Connections for hydraulic fluid power—Ports and stud ends with general threads—Part 4: Hex plugs
2023-09-07
GB/T 2878.4-2011
液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第4部分：六角螺塞
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 4: Hex plugs
2011-12-30
GB/T 2878.2-2011
液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第2部分：重型螺柱端（S系列）
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 2: heavy-duty stud ends (S series)
2011-12-30
GB/T 2878.3-2017
液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第3部分：轻型螺柱端（L系列）
Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series)
2017-05-12
BS EN ISO 6149-3-2007
Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端
2007-03-30
BS EN ISO 6149-2-2007
Connections for hydraulic fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端
2007-03-30
BS ISO 6162-2-2018
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接
2018-03-02
ISO 6149-3-2006
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第3部分:轻型（L系列）螺柱端的尺寸、设计、试验方法和要求
2006-02-16
ISO 6149-2-2006
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
液压传动和通用连接件——带ISO 261公制螺纹和O形密封圈的端口和螺柱端第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求
2006-02-16
ISO 6162-2-2018
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
液压传动.带分体式或整体式法兰夹和米制或英寸螺钉的法兰连接件.第2部分:压力为42mpa（420bar） DN 13至DN 76的法兰连接件 端口和安装面
2018-02-22
BS ISO 6162-1-2012
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws-Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
液压传动 带有分体式或整体式法兰夹和公制或英制螺钉的法兰连接
2012-12-31
UNE-EN ISO 6149-2-2008
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)
液压传动和通用连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第2部分:重型（S系列）螺柱端的尺寸、设计、试验方法和要求（ISO 6149-2-2006）
2008-10-08
UNE-EN ISO 6149-3-2008
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)
液压传动和通用连接件.带ISO 261公制螺纹和O形密封圈的端口和螺柱端.第3部分:轻型（L系列）螺柱端的尺寸、设计、试验方法和要求（ISO 6149-3-2006）
2008-10-08