JB/T 9220.8-1999 标准详情
JB/T 9220.8-1999
现行
铸造化铁炉酸性炉渣化学分析方法 DDTC分离EDTA容量法测定氧化镁量
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 11222.1-1989
现行
生物样品灰中锶-90的放射化学分析方法 二-(2-乙基己基)磷酸酯萃取色层法
Radiochemical analysis of strontium-90 in ash of biological samples--Extraction chromatography by di-(2-ethylhexyl) phosphate
行业标准
YS/T 861.3-2013
现行
铌钛合金化学分析方法 第3部分:氢量的测定 惰气熔融热导法
国家标准
GB/T 11064.14-2013
现行
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第14部分:砷量的测定 钼蓝分光光度法
Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 14: Determination of arsenic content - Molybdenum blue spectropotometic method
行业标准
YS/T 281.3-2011
现行
钴化学分析方法 第3部分:硅量的测定 钼蓝分光光度法
国家标准
GB/T 32999-2016
现行
表面化学分析 深度剖析 用机械轮廓仪栅网复型法测量溅射速率
Surface chemical analysis—Depth profiling—Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
国家标准
GB/T 39138.3-2020
现行
金镍铬铁硅硼合金化学分析方法 第3部分:铬、铁、硅、硼含量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 3:Determination of chromium, iron, silicon and boron contents—Inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 12689.1-2010
现行
锌及锌合金化学分析方法 第1部分:铝量的测定 铬天青S-聚乙二醇辛基苯基醚-溴化十六烷基吡啶分光光度法、CAS分光光度法和EDTA滴定法
Methods for chemical analysis of zinc and zinc alloys - Part 1: Determination of aluminum content - Chromazurol S-polyethylene glycol octyl phenylether-cetylpyridine bromine spectrophotometry, Chromeazurol S spectrophotometric method and EDTA titrimetry
国家标准
GB/T 14352.6-2010
现行
钨矿石、钼矿石化学分析方法 第6部分:镉量测定
Methods for chemical analysis of tungsten ores and molybdenum ores - Part 6:Determination of cadmium content
行业标准
YS/T 556.3-2009
现行
锑精矿化学分析方法 第3部分:铅量的测定 火焰原子吸收光谱法
国家标准
GB/T 6150.4-2023
现行
钨精矿化学分析方法 第4部分:硫含量的测定 高频感应红外吸收法和燃烧-碘量法
Methods for chemical analysis of tungsten concentrates—Part 4:Determination of sulfur content—High frequency-infrared absorption method and combustion-iodometric method
行业标准
YS/T 1149.7-2016
现行
锌精矿焙砂化学分析方法 第7部分:二氧化硅量的测定 钼蓝分光光度法
国家标准
GB/T 20975.20-2020
现行
铝及铝合金化学分析方法 第20部分:镓含量的测定 丁基罗丹明B分光光度法
Methods for chemical analysis of aluminium and aluminium alloys—Part 20:Determination of gallium content—Butyrhodamine B spectrophotometric method
国家标准
GB/T 19499-2004
现行
表面化学分析 数据传输格式
Surface chemical analysis--Data transfer format
行业标准
JC/T 1021.2-2023
现行
非金属矿物和岩石化学分析方法 第2部分 硅酸盐岩石、矿物及硅质原料化学分析方法
行业标准
YS/T 1149.6-2016
现行
锌精矿焙砂化学分析方法 第6部分:酸溶铁量的测定 火焰原子吸收光谱法和Na2EDTA滴定法
行业标准
JC/T 1021.3-2007
现行
非金属矿物和岩石化学分析方法 第3部分: 碳酸盐岩石、矿物化学分析方法
行业标准
YS/T 646.1-2017
现行
铂化合物化学分析方法 第1部分:铂量的测定 高锰酸钾电流滴定法
国家标准
GB/T 4324.7-2012
现行
钨化学分析方法 第7部分:钴量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of tungsten - Part 7: Determination of cobalt content - Inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 223.74-1997
现行
钢铁及合金化学分析方法 非化合碳含量的测定
Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content
国家标准
GB/T 20899.5-2021
现行
金矿石化学分析方法 第5部分:铅量的测定
Methods for chemical analysis of gold ores—Part 5: Determination of lead content
国家标准
GB/T 4698.11-1996
现行
海绵钛、钛及钛合金化学分析方法 硫酸亚铁铵滴定法测定铬量(不含钒)
Sponge titanium,titanium and titanium alloys--Determination of chromium content in the absence of Vanadium--Ammonium ferrous sulfate titration method
行业标准
YS/T 904.1-2013
现行
铁铬铝纤维丝化学分析方法 第1部分:氮量的测定 惰性气体熔融热导法
国家标准
GB/T 23274.6-2009
现行
二氧化锡化学分析方法 第6部分:硫酸盐的测定 目视比浊法
Methods for chemical analysis of stannic oxide - Part 6: Determination of sulfate content - Visual turbidimetry method
国家标准
GB/T 38513-2020
现行
铌铪合金化学分析方法 铪、钛、锆、钨、钽等元素的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of niobium hafnium alloys—Determination of hafnium, titanium, zirconium, tungsten, tantalum contents—Inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 3260.1-2024
现行
锡化学分析方法 第1部分:铜、铅、锌、镉、银、镍和钴含量的测定 火焰原子吸收光谱法
Methods for chemical analysis of tin—Part 1:Determination of copper, lead, zinc, cadmium, silver, nickel and cobalt contents—Flame atomic absorption spectroscopy
行业标准
JB/T 5448-2007
现行
静电复印干式双组份显影剂用色调剂