T/CSTM 00454-2021 标准详情
T/CSTM 00454-2021
现行
涂料中乙二醇醚及醚酯含量的测定
Determination of glycol ethers and ether esters content in coatings
标准内容导航
标准状态
标准信息
主要技术内容
本文件规定了采用气相色谱法测定涂料中乙二醇醚及醚酯含量的原理、仪器和设备、试剂和材料、试验步骤、精密度和试验报告等内容。本文件适用于各种涂料中乙二醇醚及醚酯含量的测定,包括但不限于附录A中表A.1列举的乙二醇醚及醚酯。其他材料中乙二醇醚及醚酯含量的测定也可参考本文件。
起草单位
常州光辉新材料研究所有限公司、国恒信(常州)检测认证技术有限公司、中华制漆(深圳)有限公司、通标标准技术服务(上海)有限公司、广州嘉宝莉新材料有限公司、上海市涂料研究所有限公司、海洋化工研究院有限公司、南京市产品质量监督检验院、中海油常州涂料化工研究院有限公司
起草人
王玉鹏、赵韵飞、王智、刘付芳、赖映标、王玫玫、尹继凯、黄祝华、季军宏
相似标准推荐
T/CSTM 00510-2021
现行
水性涂料用消泡剂 消抑泡性能的测试方法
Defoamer for paint and coating —Test method for defoaming and antifoaming performance
国家标准
GB/T 9272-2007
现行
色漆和清漆 通过测量干涂层密度测定涂料的不挥发物体积分数
Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
行业标准
LY/T 2710-2016
现行
木地板用紫外光固化涂料
T/CNCIA 01009-2018
现行
商用车辆低VOCs低温烘烤涂料
Low Bake Commercial Vehicle Low VOCs Paint
行业标准
HG/T 6088-2022
现行
透水道路用涂料
国家标准
GB/T 17850.1-2017
现行
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分:导则和分类
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part1:General introduction and classification
行业标准
AQ 5204-2008
现行
涂料生产企业安全技术规程
行业标准
HG/T 5058-2016
现行
轨道交通车辆用水性阻尼涂料
国家标准
GB/T 10664-2003
现行
涂料印花色浆 色光、着色力及颗粒细度的测定
Pigment printing ink--Determination of printing shade,relative strength and granule fineness
国家标准
GB/T 23991-2009
现行
涂料中可溶性有害元素含量的测定
Determination of soluble harmful elements content of coatings
国家标准
GB/T 41953-2022
现行
色漆和清漆 涂料中水分含量的测定 气相色谱法
Paints and varnishes—Determination of water content of coating materials—Gas-chromatographic method
行业标准
HG/T 5367.2-2020
现行
轨道交通车辆用涂料 第2部分:耐电弧绝缘涂料
T/CSTM 00187-2021
现行
铸造涂料用硅酸镁铝
Magnesium aluminum siliacte for foundry coating
行业标准
JC/T 1040-2020
现行
建筑外表面用热反射隔热涂料
国家标准
GB/T 25252-2010
现行
酚醛树脂防锈涂料
Phenolic resin anticorrosive coatings
国家标准
GB/T 19816.5-2005
现行
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
国家标准
GB 38469-2019
现行
船舶涂料中有害物质限量
Limit of harmful substances of marine coatings
T/BYXT 005.3-2023
现行
稀土抗抑菌应用材料 第3部分:涂料
Rare earth antibacterial Intermediate materials Part 3:Coating
国家标准
GB/T 18838.3-2008
现行
涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂
Preparation of steel substrates before application of paints and related products-Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit
行业标准
HG/T 6004-2022
现行
涂料用增稠流变剂 凹凸棒土
行业标准
SN/T 3114-2012
现行
黏合剂、油墨、涂料配制品中六种邻苯二甲酸酯的测定 气质联用法
行业标准
HG/T 4345-2012
现行
涂料用彩色复合岩片
国家标准
GB/T 30647-2014
现行
涂料中有害元素总含量的测定
Determination of harmful elements total content of coatings
行业标准
SN/T 3713-2013
现行
涂料中含铬颜料的筛选方法 电感耦合等离子原子发射光谱法
T/CSTM 00636-2022
现行
涂料及相关材料中总挥发性有机化合物释放量(TVOC)的测定 气袋法
Determination of total volatile organic compounds (TVOC) emission from coatings and related materials — Air-bag method
T/IGIA 002-2021
现行
空气净化器在现场环境下使用效果的评价方法及技术要求
Evaluation methods and technical requirements of effect for air cleaner under site environment