GB/T 19812.1-2017 标准详情
GB/T 19812.1-2017
现行
塑料节水灌溉器材 第1部分:单翼迷宫式滴灌带
Plastic equipment for water saving irrigation—Part 1:Drip tape with labyrinth on one side
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 14208.3-2009
现行
纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分:压缩强度的测定
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength
行业标准
LY 1160-1995
现行
塑料弹壳
国家标准
GB/T 24148.7-2014
现行
塑料 不饱和聚酯树脂(UP-R) 第7部分: 室温条件下凝胶时间的测定
Plastics—Unsaturated polyester resins—Part 7: Measurement of gel time at ambient temperature
国家标准
GB/T 39821-2021
现行
塑料 不能从规定漏斗流出的模塑材料表观密度的测定
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
国家标准
GB/T 20415-2025
即将实施
橡胶或塑料涂覆制品 绝缘带
Rubber- or plastic-coated fabrics—Insulating tape
行业标准
SN/T 5720-2024
现行
塑料及其制品中N-羟甲基丙烯酰胺的检测 气相色谱-质谱法
国家标准
GB/T 40315-2021
现行
塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器
Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
T/CVDA 1-2019
现行
兽用预灌封塑料乳房注入器
T/ZZB 1079-2019
现行
塑料及其制品耐氙灯老化试验仪
Xenon-arc sources aging resistance tester for plastics and their products
国家标准
GB/T 40006.1-2021
现行
塑料 再生塑料 第1部分:通则
Plastics—Recycled plastic—Part 1:General rules
行业标准
JB/T 7600.5-2008
现行
电线电缆PNS型机用线盘 第5部分:塑料机用线盘
行业标准
JB/T 4278.5-2011
现行
橡皮塑料电线电缆试验仪器设备检定方法 第5部分:单根绝缘电线电缆垂直燃烧试验装置
国家标准
GB/T 6743-2008
现行
塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定
Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value
国家标准
GB/T 18743.2-2022
现行
热塑性塑料管材 简支梁冲击强度的测定 第2部分:不同材料管材的试验条件
Thermoplastics pipes—Determination of pendulum impact strength by the Charpy method—Part 2: Test condition for pipes of various materials
行业标准
TB/T 2476.2-2017
现行
铁路信号电缆 第2部分:塑料护套铁路信号电缆
国家标准
GB/T 19812.5-2019
现行
塑料节水灌溉器材 第5部分:地埋式滴灌管
Plastic equipment for water saving irrigation—Part 5:Sub-surface drip irrigation pipe
国家标准
GB/T 16778-2009
现行
纤维增强塑料结构件失效分析一般程序
General procedure of failure analysis for fiber reinforced plastic structural products
国家标准
GB/T 18991-2003
现行
冷热水系统用热塑性塑料管材和管件
Thermoplastics pipes and fittings forhot and cold water systems
T/ZZB 2252-2021
现行
手机摄像模块用塑料结构件
Molded plastic structural parts for cell phone camera
行业标准
QC/T 350-2023
现行
塑料开尾销钉
行业标准
SY/T 6769.4-2024
现行
非金属管道设计、施工及验收规范 第4部分:钢丝/钢带增强热塑性塑料复合连续管
T/ZZB 3154-2023
现行
塑料扁丝拉丝机
Plastic flat filament extrusion machine
行业标准
CJ/T 124-2016
现行
给水用钢骨架聚乙烯塑料复合管件
国家标准
GB/T 5471-2008
现行
塑料 热固性塑料试样的压塑
Plastics - Compression moulding of test specimens of thermosetting materials
T/FJEMIA 9-2023
现行
海水和沉积物中微塑料测定
Determination of microplastics in seawater and sediment
地方标准
DB36/T 2049-2024
现行
信丰萝卜种子繁育技术规程