GB/T 24131.1-2018 标准详情
GB/T 24131.1-2018
现行
生橡胶 挥发分含量的测定 第1部分:热辊法和烘箱法
Rubber, raw—Determination of volatile matter content—Part 1:Hot-mill method and oven method
标准内容导航
标准状态
标准信息
相似标准推荐
行业标准
SN/T 5583-2023
现行
再生橡胶及其制品中芘等10种芘类化合物的测定 气相色谱-质谱法
国家标准
GB/T 18949-2003
现行
橡胶和塑料软管 动态条件下耐臭氧性能的评定
Rubber and plastics hoses--Assessment of ozone resistance under dynamic conditions
国家标准
GB/T 3512-2014
现行
硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验
Rubber, vulcanized or thermoplastic―Accelerated ageing and heat resistance tests
国家标准
GB/T 7761-2003
现行
橡胶 用锥形件测定与刚性材料的粘合强度
Rubber--Determination of adhesion to rigid materials using conical shaped parts
国家标准
GB/T 16584-1996
现行
橡胶 用无转子硫化仪测定硫化特性
Rubber--Measurement of vulcanization characteristics with rotorless curemeters
国家标准
GB/T 9881-2008
现行
橡胶 术语
Rubber - Vocabulary
国家标准
GB/T 9579-2006
现行
橡胶配合剂 炭黑 在丁苯橡胶中的鉴定方法
Rubber compounding ingredients―Carbon black―Method of evaluation in styrene-butadiene rubbers
行业标准
SN/T 4775-2017
现行
橡胶及其制品中秋兰姆含量的测定 高效液相色谱法
国家标准
GB/T 31399-2015
现行
冷轧橡胶沉没辊
Sinking rubber roller for cold rolled sheet
国家标准
GB/T 7759.1-2015
现行
硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分:在常温及高温条件下
Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1: At ambient or elevated temperatures
国家标准
GB/T 14837.2-2014
现行
橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第2部分:丙烯腈-丁二烯橡胶和卤化丁基橡胶
Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 2: Acrylonitrile-butadiene and halobutyl rubbers
国家标准
GB/T 18953-2003
现行
橡胶配合剂 硬脂酸 定义及试验方法
Rubber compounding ingredients--Stearic acid--Definition and test methods
国家标准
GB/T 24797.3-2014
现行
橡胶包装用薄膜 第3部分:乙烯-丙烯-二烯烃橡胶(EPDM)、丙烯腈-丁二烯橡胶(NBR)、氢化丙烯腈-丁二烯橡胶(HNBR)、乙烯基丙烯酸酯橡胶(AEM)和丙烯酸酯橡胶(ACM)
Film for wrapping rubber bales―Part 3: Ethylene-propylene-diene rubber (EPDM),acrylonitrilebutadiene rubber (NBR),hydrogenated nitrile-butadiene rubber(HNBR),acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)
国家标准
GB/T 46228-2025
即将实施
溴化异丁烯-异戊二烯橡胶(BIIR)
Brominated isobutene-isoprene rubber(BIIR)
地方标准
DB1311/T 052.1-2024
现行
工程橡胶产业标准体系 第1部分:建设指南
国家标准
GB/T 20688.2-2006
现行
橡胶支座 第2部分:桥梁隔震橡胶支座
Rubber bearings - Part 2: Elastomeric seismic-protection isolators for bridges
行业标准
SN/T 5271-2019
现行
橡胶和橡胶制品 氟橡胶 热重分析法测定硫化和未硫化胶的成分
国家标准
GB/T 18951-2003
现行
橡胶配合剂 氧化锌 试验方法
Rubber compounding ingredients--Zinc oxide--Test methods
行业标准
SN/T 0541.2-2011
现行
进出口标准橡胶检验方法 第2部分:塑性值和塑性保持率的测定
行业标准
SN/T 3815-2014
现行
橡胶和塑料制品中磷酸三(2-氯乙基)酯的测定 气相色谱-质谱法
国家标准
GB/T 531.2-2009
现行
硫化橡胶或热塑性橡胶 压入硬度试验方法 第2部分:便携式橡胶国际硬度计法
Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 2: IRHD pocket meter method
行业标准
SH/T 1157.2-2025
现行
生橡胶 丙烯腈-丁二烯橡胶(NBR)中结合丙烯腈含量的测定 第2部分:凯氏定氮法
国家标准
GB/T 14853.6-2013
现行
橡胶用造粒炭黑 第6部分:单个颗粒破碎强度的测定
Rubber compounding ingredients―Pelletized carbon black―Part 6:Determination of individual pellet crushing strength
国家标准
GB/T 11203-2001
现行
橡胶中锌含量的测定 EDTA滴定法
Rubber--Determination of zinc content--EDTA titrimetric method
行业标准
NY/T 3009-2016
现行
天然生胶 航空轮胎橡胶加工技术规程
国家标准
GB/T 17948.1-2018
现行
旋转电机 绝缘结构功能性评定 散绕绕组试验规程 热评定和分级
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for wire-wound windings—Thermal evaluation and classification