GB/T 42543-2023 标准详情
GB/T 42543-2023
现行
表面化学分析 扫描探针显微术 悬臂梁法向弹性常数的测定
Surface chemical analysis—Scanning probe microscopy—Determination of cantilever normal spring constants
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 18340.2-2010
现行
地质样品有机地球化学分析方法 第2部分:有机质稳定碳同位素测定 同位素质谱法
Organic geochemical analysis method for geological samples - Part 2: Determination of organic carbon stable isotopic component - Isotopic mass spectrometry
行业标准
YS/T 226.8-2009
现行
硒化学分析方法 第8部分:铜量的测定 火焰原子吸收光谱法
国家标准
GB/T 40795.2-2021
现行
镧铈金属及其化合物化学分析方法 第2部分:稀土量的测定
Chemical analysis methods of lanthanum-cerium metals and their compounds—Part 2:Determination of rare earth content
国家标准
GB/T 4325.11-2013
现行
钼化学分析方法 第11部分:铝量的测定 铬天青S分光光度法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of molybdenum - Part 11: Determination of aluminum content - Chromazurol S spectrophotometry and inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 3654.5-1983
现行
铌铁化学分析方法 钼蓝光度法测定磷量
Methods for chemical analysis of ferroniobium--The molybdenum blue photometric method for the determination of the phosphorus content
行业标准
YS/T 1379-2020
现行
纯铂化学分析方法 钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅含量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 34499.1-2017
现行
铱化合物化学分析方法 第1部分:铱量的测定 硫酸亚铁电流滴定法
Method for chemical analysis of iridium compounds—Part 1: Determination of iridium content—Electricity titration using ferrous sulfate
行业标准
YS/T 1348.5-2020
现行
铅冶炼分银渣化学分析方法 第5部分:铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法
国家标准
GB/T 43753.3-2024
现行
贵金属合金电镀废水化学分析方法 第3部分:硫酸盐含量的测定 硫酸钡重量法
Methods for chemical analysis of precious metals alloys electroplating wastewater—Part 3:Determination of sulfate content—Barium sulphate gravimetric method
国家标准
GB/T 20975.31-2019
现行
铝及铝合金化学分析方法 第31部分:磷含量的测定 钼蓝分光光度法
Methods for chemical analysis of aluminium and aluminium alloys—Part 31:Determination of phosphorus content—Molybdenum blue spectrophotometry
行业标准
YS/T 667.4-2009
现行
化学品氧化铝化学分析方法 第4部分:4A沸石中砷、汞含量的测定 氢化物发生-电感耦合等离子体发射光谱法
国家标准
GB/T 13747.12-2019
现行
锆及锆合金化学分析方法 第12部分:硅量的测定 钼蓝分光光度法
Methods for chemical analysis of zirconium and zirconium alloys—Part 12:Determination of silicon content—Molybdenum blue spectrophotometry
行业标准
YS/T 1346-2020
现行
铜砷滤饼化学分析方法 铼含量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/Z 32490-2016
现行
表面化学分析 X射线光电子能谱 确定本底的程序
Surface chemical analysis—X-ray photoelectron spectroscopy—Procedures for determining backgrounds
国家标准
GB/T 15072.10-2008
现行
贵金属合金化学分析方法 金合金中镍量的测定 EDTA络合返滴定法
Test method of precious metal alloys - Determination of nickel content for gold alloys - Complexometric backing titration using EDTA
行业标准
SN/T 1031.7-2003
现行
进出口粗氧化锑化学分析方法砷含量的测定
行业标准
YS/T 1014.3-2014
现行
三氧化二铋化学分析方法 第3部分:氯量的测定 氯化银比浊法
行业标准
YS/T 349.4-2010
现行
硫化钴精矿化学分析方法 第4部分:二氧化硅量的测定 氟硅酸钾容量法
国家标准
GB/T 18340.1-2010
现行
地质样品有机地球化学分析方法 第1部分:轻质原油分析 气相色谱法
Organic geochemical analysis methods for geological samples - Part 1: Analysis of light crude oils - Gas chromatography
行业标准
YS/T 1200.1-2017
现行
1,1’-双二苯基膦二茂铁二氯化钯化学分析方法 第1部分:钯量的测定 丁二酮肟重量法
国家标准
GB/T 12690.5-2017
现行
稀土金属及其氧化物中非稀土杂质化学分析方法 第5部分:钴、锰、铅、镍、铜、锌、铝、铬、镁、镉、钒、铁量的测定
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 5: Determination of cobalt,manganese,lead,nickel,copper,zinc,aluminum,chromium,magnesium,cadmium,vanadium and iron contents
国家标准
GB/T 13748.20-2024
现行
镁及镁合金化学分析方法 第20部分:元素含量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of magnesium and magnesium alloys—Part 20:Determination of elements content—Inductively coupled plasma atomic emission spectrometric method
国家标准
GB/T 7728-2021
现行
冶金产品化学分析 火焰原子吸收光谱法通则
Chemical analysis of metallurgical products—General rule for flame atomic absorption spectrometric methods
国家标准
GB/T 13748.9-2013
现行
镁及镁合金化学分析方法 第9部分:铁含量测定 邻二氮杂菲分光光度法
Chemical analysis methods of magnesium and magnesium alloys - Part 9:Determination of iron content - Orthopenanthroline spectrophotometric method
国家标准
GB/T 223.50-1994
现行
钢铁及合金化学分析方法 苯基荧光酮-溴化十六烷基三甲基胺直接光度法测定锡量
Methods for chemical analysis of iron,steel and alloy--The phenylfluorone-CTMAB direct photometric method for the determination of tin content
国家标准
GB/T 15092.3-2023
现行
器具开关 第2-5部分:转换选择器的特殊要求
Switches for appliances—Part 2-5: Particular requirements for change-over selectors