GB/T 25361.2-2010 标准详情
GB/T 25361.2-2010
现行
内燃机 活塞销 第2部分:检验规则
Internal combustion engines - Piston pins - Part 2: Inspection measuring principles
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 8243.9-2012
现行
内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests
行业标准
LY/T 3237-2020
现行
林业机械 以内燃机为动力的半挂式枝丫切碎机
行业标准
DB/T 44-2011
现行
地震救援装备检测规程 内燃机动力工具
国家标准
GB/T 14097-2023
现行
往复式内燃机 噪声限值
Reciprocating internal combustion engines—Limit values of emitted noise
国家标准
GB/T 1149.2-2010
现行
内燃机 活塞环 第2部分:术语
Internal combustion engines - Piston rings - Part 2: Vocabulary
国家标准
GB/T 17804-2009
现行
往复式内燃机 图形符号
Reciprocating internal combustion engines - Graphical symbols
行业标准
LY/T 3166-2019
现行
林业机械 以内燃机为动力的山地单轨运输机
国家标准
GB/T 20651.2-2014
现行
往复式内燃机 安全 第2部分:点燃式发动机
Reciprocating internal combustion engines―safety―Part 2: Spark ignition engines
国家标准
GB 20800.1-2006
现行
爆炸性环境用往复式内燃机防爆技术通则 第1部分:可燃性气体和蒸汽环境用 Ⅱ类内燃机
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres
国家标准
GB/T 8243.4-2003
现行
内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法)
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method)
国家标准
GB/T 6072.1-2008
现行
往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求
Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
国家标准
GB 20800.3-2008
现行
爆炸性环境用往复式内燃机防爆技术通则 第3部分:存在甲烷和(或)可燃性粉尘的地下矿区巷道用I类内燃机
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
国家标准
GB/T 1151-2023
现行
内燃机 主轴瓦及连杆轴瓦 技术条件
Internal combustion engines—Main and connecting rod bearings—Specifications
国家标准
GB/T 14024-1992
现行
内燃机电站无线电干扰特性的测量方法及允许值 传导干扰
Limits and methods of measurement of radio interference characteristics of electric power plant with internal combustion engines--Conducted interference
国家标准
GB/T 1859.3-2015
现行
往复式内燃机 声压法声功率级的测定 第3部分:半消声室精密法
Reciprocating internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms
国家标准
GB/T 1149.1-2008
现行
内燃机 活塞环 第1部分:通用规则
Internal combustion engines - Piston rings - Part 1: General specifications
国家标准
GB/T 20064.2-2006
现行
往复式内燃机 手柄起动装置 第2部分:脱开角试验方法
Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
国家标准
GB/T 1149.5-2008
现行
内燃机 活塞环 第5部分:检验方法
Internal combustion engines - Piston rings - Part 5: Inspection measuring principles
国家标准
GB/T 33192-2016
现行
内燃机车用柴油机通用技术条件
General technical specification for diesel engine of locomotive
国家标准
GB/T 6072.5-2003
现行
往复式内燃机 性能 第5部分: 扭转振动
Reciprocating internal combustion engines--Performance--Part 5: Torsional vibrations
国家标准
GB/T 21406-2008
现行
内燃机 发动机的重量(质量)标定
Internal combustion engines - Engine weight (mass) declaration
国家标准
GB/T 32222-2015
现行
再制造内燃机 通用技术条件
Remanufactured internal combustion engine—General specifications
国家标准
GB/T 8243.1-2003
现行
内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics
国家标准
GB/T 28950.1-2012
现行
道路车辆和内燃机 滤清器名词术语 第1部分:滤清器和滤清器部件定义
Road vehicles and internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components
国家标准
GB/T 8190.3-2003
现行
往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法
Reciprocating internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
国家标准
GB/T 25742.1-2010
现行
机器状态监测与诊断 数据处理、通信与表示 第1部分:一般指南
Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 1: General guidelines