《NB/T 20007.9-2011 压水堆核电厂用不锈钢 第9部分:1、2、3级奥氏体不锈钢对焊无缝管件》标准查询解读、电子版标准下载
NB/T 20007.9-2011
现行
压水堆核电厂用不锈钢 第9部分:1、2、3级奥氏体不锈钢对焊无缝管件
《NB/T 20007.9-2011 压水堆核电厂用不锈钢 第9部分:1、2、3级奥氏体不锈钢对焊无缝管件》标准内容导航
标准状态
标准信息
起草单位
中国核电工程有限公司、江苏华阳金属管件有限公司等
起草人
路晓晖、崔岚 等
相似标准推荐
团体标准
T/HEBQIA 272-2024
现行
奥氏体不锈钢丝
国家标准
GB/T 36027-2018
现行
核电站用奥氏体不锈钢棒
Austenitic stainless steel bars for nuclear power plants
行业标准
NB/T 20007.8-2024
现行
压水堆核电厂用不锈钢 第8部分:1、2、3级设备用奥氏体不锈钢无缝钢管
行业标准
NB/T 20007.6-2024
现行
压水堆核电厂用不锈钢 第6部分:堆内构件用奥氏体不锈钢板
团体标准
T/CISA 020-2019
现行
08Cr19Mn6Ni3Cu2N高强度含氮奥氏体不锈钢热轧(锻)无缝钢管圆管坯
08Cr19Mn6Ni3Cu2N high strengthnitrogen alloyed austeniticstainless steel seamless round tube blank
行业标准
NB/T 20007.1-2024
现行
压水堆核电厂用不锈钢 第1部分:1、2、3级设备用奥氏体不锈钢锻件
行业标准
NB/T 20007.5-2024
现行
压水堆核电厂用不锈钢 第5部分:1、2、3级设备用奥氏体不锈钢板
行业标准
NB/T 20007.25-2021
现行
压水堆核电厂用不锈钢 第25部分:泵用奥氏体-铁素体不锈钢A、B、C类非承压铸造内件
国家标准
GB/T 25996-2019
现行
绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法
Test method for thermal insulations on external stress corrosion cracking of austenitic stainless steel
国家标准
GB/T 1954-2008
现行
铬镍奥氏体不锈钢焊缝铁素体含量测量方法
Methods of measurement for ferrite content in austenitic Cr-Ni stainless steel weld metals
国家标准
GB/T 4334-2020
现行
金属和合金的腐蚀 奥氏体及铁素体-奥氏体(双相)不锈钢晶间腐蚀试验方法
Corrosion of metals and alloys-Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels
国家标准
GB/T 17393-2008
现行
覆盖奥氏体不锈钢用绝热材料规范
Specification for thermal insulation for use in contact with austenitic stainless steel
国家标准
GB/T 37578-2019
现行
尿素级超低碳奥氏体不锈钢无缝钢管
Urea grade ultra-low carbon austenitic seamless stainless steel tubes and pipes
国家标准
GB/T 34475-2017
现行
尿素级奥氏体不锈钢棒
Urea grade austenitic stainless steel bars
团体标准
T/CNS 50.3-2021
现行
核电厂用奥氏体不锈钢构筑成形工艺技术要求 第3部分:锻造加热
Additive forging technique applied to austenitic stainless steel used in nuclear power plant - part 3: Heating for forging
国家标准
GB/T 120.1-2000
现行
内螺纹圆柱销 不淬硬钢和奥氏体不锈钢
Parallel pins with internal thread,of unhardened steel and austenitic stainless steel
团体标准
T/DASIV 005-2024
现行
大厚度奥氏体不锈钢管全位置窄间隙激光焊接技术规范
Specifications for All-Position Laser Narrow-Gap Welding of Thick Austenitic Stainless Steel Pipes
团体标准
T/CISA 022-2019
现行
08Cr19Mn6Ni3Cu2N高强度含氮奥氏体不锈钢钢板和钢带
08Cr19Mn6Ni3Cu2N high strength nitrogen alloyed austenitic stainless steel plate,sheet and strip
国家标准
GB/T 21833.3-2024
现行
奥氏体-铁素体型双相不锈钢无缝钢管 第3部分:油气输送用管
Seamless austenitic-ferritic (duplex) stainless steel tubes and pipes—Part 3:Pipes for oil and gas transmission
国家标准
GB/T 38223-2019
现行
奥氏体不锈钢铸件中铁素体含量测定方法
Determination of ferrite content in austenitic stainless steel castings
国家标准
GB/T 30073-2013
现行
核电站热交换器用奥氏体不锈钢无缝钢管
Seamless austenitic stainless steel tubes for heat exchangers in nuclear power plant
行业标准
NB/T 20007.10-2024
现行
压水堆核电厂用不锈钢 第10部分:1、2、3级热交换器用奥氏体不锈钢无缝钢管
行业标准
NB/T 20007.40-2015
现行
压水堆核电厂用不锈钢 第40部分:堆内构件用奥氏体不锈钢锻件
行业标准
DL/T 1422-2015
现行
18Cr-8Ni系列奥氏体不锈钢锅炉管显微组织老化评级标准
行业标准
NB/T 20007.28-2014
现行
压水堆核电厂用不锈钢 第28部分:3级耐海水腐蚀奥氏体-铁素体双相不锈钢承压铸件
行业标准
MT/T 684-1997
现行
矿用提升容器重要承载件无损探伤方法与验收规范