DB63/T 1613-2017 标准详情
DB63/T 1613-2017
现行
人造纳米金刚石中铁、镁、锰、铜、钙、铝的化学分析方法 电感耦合等离子体发射光谱法
标准内容导航
标准状态
标准信息
适用范围
本标准规定了人造纳米金刚石产品中铁、镁、锰、铜、钙、铝的测定方法的原理、试剂和仪器、试样制备、试验方法等技术内容。测定范围为ω(Fe)/μg.g1:452500;ω(Mg)/μg.g1:182500;ω(Mn)/μg.g1:9125;ω(Cu)/μg.g1:9125;ω(Ca)/μg.g1:542500;ω(Al)/μg.g1:722500。
起草单位
青海省地质矿产测试应用中心、青海省地质勘查开发局。
起草人
石华、刘氘、陶丽萍、魏振宏、赵呈祥、赵玉卿、赵呈祥、谢海东、薛福林。
相似标准推荐
行业标准
YS/T 556.4-2009
现行
锑精矿化学分析方法 第4部分:湿存水量的测定 重量法
国家标准
GB/T 43753.4-2024
现行
贵金属合金电镀废水化学分析方法 第4部分:氯离子含量的测定 氯化银浊度法
Methods for chemical analysis of precious metals alloys electroplating wastewater—Part 4:Determination of chlorine ion—Silver chlorine turbidimetric method
国家标准
GB/T 15249.1-2009
现行
合质金化学分析方法 第1部分:金量的测定 火试金重量法
Methods for chemical analysis of crude gold - Part 1: Determination of gold content - Fire assay gravimetric method
国家标准
GB/T 28629-2024
现行
水泥熟料中游离二氧化硅化学分析方法
Methods for chemical analysis of free silicon dioxide in cement clinker
国家标准
GB/T 23273.5-2009
现行
草酸钴化学分析方法 第5部分:钙、镁、钠量的测定 火焰原子吸收光谱法
Methods for chemical analysis of cobalt oxalate - Part 5: Determination of calcium,magnesium and sodium content - Flame atomic absorption spectrometry
国家标准
GB/T 18114.9-2025
现行
稀土精矿化学分析方法 第9部分:五氧化二磷含量的测定
Chemical analysis methods for rare earth concentrates—Part 9: Determination of phosphorus pentoxide content
行业标准
YS/T 461.8-2013
现行
混合铅锌精矿化学分析方法 第8部分:铜量的测定 火焰原子吸收光谱法
国家标准
GB/T 25186-2010
现行
表面化学分析 二次离子质谱 - 由离子注入参考物质确定相对灵敏度因子
Surface chemical analysis - Secondary-ion mass spectrometry - Determination of relative sensitivity factors from ion-implanted reference materials
行业标准
YS/T 514.7-2009
现行
高钛渣、金红石化学分析方法 第7部分:氧化钙和氧化镁量的测定 火焰原子吸收光谱法
国家标准
GB/T 14849.1-2020
现行
工业硅化学分析方法 第1部分:铁含量的测定
Methods for chemical analysis of silicon metal—Part 1:Determination of iron content
国家标准
GB/T 20975.28-2019
现行
铝及铝合金化学分析方法 第28部分:钴含量的测定 火焰原子吸收光谱法
Methods for chemical analysis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry
国家标准
GB/T 4698.24-2017
现行
海绵钛、钛及钛合金化学分析方法 第24部分:镍量的测定 丁二酮肟分光光度法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 24:Determination of nickel content—Dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry
行业标准
YS/T 568.11-2008
现行
氧化锆、氧化铪化学分析方法 镍量的测定 α-联呋喃甲酰二肟分光光度法
行业标准
YS/T 555.5-2009
现行
钼精矿化学分析方法 磷量的测定 磷钼蓝分光光度法
国家标准
GB/T 17413.1-2010
现行
锂矿石、铷矿石、铯矿石化学分析方法 第1部分:锂量测定
Methods for chemical analysis of lithium、rubidium and cesium ores - Part 1: Determination of lithium content
国家标准
GB/T 40795.2-2021
现行
镧铈金属及其化合物化学分析方法 第2部分:稀土量的测定
Chemical analysis methods of lanthanum-cerium metals and their compounds—Part 2:Determination of rare earth content
国家标准
GB/T 40110-2021
现行
表面化学分析 全反射X射线荧光光谱法(TXRF)测定硅片表面元素污染
Surface chemical analysis—Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
国家标准
GB/T 20975.3-2020
现行
铝及铝合金化学分析方法 第3部分:铜含量的测定
Methods for chemical analysis of aluminium and aluminium alloys—Part 3:Determination of copper content
国家标准
GB/T 3884.17-2014
现行
铜精矿化学分析方法 第17部分:三氧化二铝量的测定 铬天青S胶束增溶光度法和沉淀分离-氟盐置换-Na2EDTA滴定法
Methods for chemical analysis of copper concentrates―Part 17:Determination of aluminium oxide content―Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method
行业标准
YS/T 239.2-2010
现行
三硫化二锑化学分析方法 第2部分:化合硫量的测定 燃烧中和滴定法
行业标准
YS/T 1396.2-2020
现行
二氯四氨铂化学分析方法 第2部分:镁、钙、铁、镍、铜、铑、钯、银、铱、金、铅含量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 16484.21-2009
现行
氯化稀土、碳酸轻稀土化学分析方法 第21部分:氧化铁量的测定 1,10-二氮杂菲分光光度法
Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 21: Determination of iron oxide content - 1,10-phenanthroline spectrophotometry
行业标准
JB/T 8063.6-2011
现行
粉末冶金材料与制品化学分析方法 第6部分:铜基材料与制品中铅的测定(电解分离-EDTA滴定法)
国家标准
GB/T 6150.3-2023
现行
钨精矿化学分析方法 第3部分:磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of tungsten concentrates—Part 3: Determination of phosphorus content—The phosphorus molybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry
行业标准
YS/T 581.18-2012
现行
氟化铝化学分析方法和物理性能测定方法 第18部分:X射线荧光光谱分析(压片)法测定元素含量
行业标准
NY/T 2339-2013
现行
农药登记用杀蚴剂药效试验方法及评价