《YS/T 1115.6-2016 铜原矿和尾矿化学分析方法 第6部分:镉量的测定 火焰原子吸收光谱法》标准查询解读、电子版标准下载
YS/T 1115.6-2016
现行
铜原矿和尾矿化学分析方法 第6部分:镉量的测定 火焰原子吸收光谱法
《YS/T 1115.6-2016 铜原矿和尾矿化学分析方法 第6部分:镉量的测定 火焰原子吸收光谱法》标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 30815-2014
现行
表面化学分析 分析样品的制备和安装方法指南
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis
行业标准
YS/T 746.12-2010
现行
无铅锡基焊料化学分析方法 第12部分:铟含量的测定 Na2EDTA滴定法
行业标准
YS/T 535.4-2009
现行
氟化钠化学分析方法 第4部分:铁含量的测定 邻二氮杂菲分光光度法
国家标准
GB/T 20975.4-2020
现行
铝及铝合金化学分析方法 第4部分:铁含量的测定
Methods for chemical analysis of aluminium and aluminium alloys—Part 4:Determination of iron content
行业标准
YS/T 1121.2-2016
现行
氯化钯化学分析方法 第2部分:镁、铝、铬、锰、铁、镍、铜、锌、钌、铑、银、锡、铱、铂、金、铅、铋量的测定 电感耦合等离子体质谱法
国家标准
GB/T 14506.4-2010
现行
硅酸盐岩石化学分析方法 第4部分:三氧化二铝量测定
Methods for chemical analysis of silicate rocks - Part 4: Determination of aluminium oxide content
行业标准
YS/T 1380-2020
现行
铑化合物化学分析方法 氯离子、硝酸根离子含量的测定 离子色谱法
行业标准
YS/T 281.13-2011
现行
钴化学分析方法 第13部分:硫量的测定 高频感应炉燃烧红外吸收法
国家标准
GB/T 23273.3-2009
现行
草酸钴化学分析方法 第3部分:砷量的测定 氢化物发生-原子荧光光谱法
Methods for chemical analysis of cobalt oxatate - Part 3: Determination of arsenic content - Hydride generation-atomic fluorescence spectrometry
行业标准
YS/T 461.9-2013
废止
混合铅锌精矿化学分析方法 第9部分:银量的测定 火焰原子吸收光谱法
国家标准
GB/T 38389-2019
现行
氧化铟锡靶材化学分析方法
Methods for chemical analysis of indium-tin oxide target
行业标准
YS/T 922-2013
现行
高纯铜化学分析方法 痕量杂质元素含量的测定 辉光放电质谱法
国家标准
GB/T 3260.6-2013
现行
锡化学分析方法 第6部分:砷量的测定 孔雀绿-砷钼杂多酸分光光度法
Methods for chemical analysis of tin―Part 6: Determination of arsenic contents―Malachite green arsenic molybdenum heteropoly acid photometric method
国家标准
GB/Z 39124-2020
现行
铅精矿化学分析方法 锑含量的测定 硫酸铈滴定法
Method for chemical analysis of lead concentrates—Determination of antimony content—Ce(SO4)2 titration method
国家标准
GB/T 4103.8-2012
现行
铅及铅合金化学分析方法 第8部分:碲量的测定
Methods for chemical analysis of lead and lead alloys - Part 8: Determination of tellurium content
行业标准
JB/T 7948.3-2017
现行
焊剂化学分析方法 第3部分:氧化铝含量测定
国家标准
GB/T 18115.12-2006
现行
稀土金属及其氧化物中稀土杂质化学分析方法 钇中镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱和镥量的测定
Chemical analysis methods of rare earth impurities in rare earth metals and their oxides Yttrium-Determination of lanthanum, cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium and lutetium contents
国家标准
GB/T 42513.6-2024
现行
镍合金化学分析方法 第6部分:钼含量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of nickel alloys—Part 6: Determination of molybdenum content—Inductively coupled plasma atomic emission spectrometric method
国家标准
GB/T 17433-2014
现行
冶金产品化学分析基础术语
Foundation terms for chemical analysis of metallurgical products
国家标准
GB/T 22662.9-2008
现行
氟钛酸钾化学分析方法 第9部分:五氧化二磷含量的测定 钼蓝分光光度法
Chemical analysis methods of potassium fluotitanate - Part 9: Determination of phosphoruo content - Molybdenum blue photometric method
国家标准
GB/T 8152.5-2006
现行
铅精矿化学分析方法 砷量的测定 原子荧光光谱法
Methods for chemical analysis of lead concentrates―Determination of arsenic content―Atomic fluorescence spectrometer method
国家标准
GB/T 22571-2017
现行
表面化学分析 X射线光电子能谱仪 能量标尺的校准
Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
行业标准
YS/T 281.5-2011
现行
钴化学分析方法 第5部分:磷量的测定 钼蓝分光光度法
国家标准
GB/T 18114.8-2025
现行
稀土精矿化学分析方法 第8部分:稀土氧化物含量和配分量的测定
Chemical analysis methods for rare earth concentrates—Part 8: Determination of rare earth oxide contents and distribution
国家标准
GB/T 21994.4-2008
现行
氟化镁化学分析方法 第4部分:镁含量的测定 EDTA容量法
Chemical analysis of magnesium fluoride - Part 4: Determination of magnesium - EDTA volumetric method
行业标准
YD/T 3592-2019
现行
基于LTE的车联网无线通信技术 基站设备技术要求