GB/T 7352-2008 标准详情
GB/T 7352-2008
现行
利用电离辐射源的电测量系统和仪表
Electrical measuring systems and instruments utilizing ionizing radiation source
标准内容导航
标准状态
标准信息
相似标准推荐
行业标准
CJ/T 188-2018
现行
户用计量仪表数据传输技术条件
国家标准
GB/T 33899-2017
现行
工业物联网仪表互操作协议
Interoperating protocol for instrument of industrial internet of things
国家标准
GB/T 8355-2008
现行
船舶用电动测量和控制仪表 通用技术条件
General specifications for marine electrical measurement and control instruments
国家标准
GB/T 13283-2008
现行
工业过程测量和控制用检测仪表和显示仪表精确度等级
Accuracy class of measuring instruments and display instruments for industrial process measurement and control
国家标准
GB/T 22264.4-2022
现行
安装式数字显示电测量仪表 第4部分:频率表的特殊要求
Mounted digital display electric measuring instruments—Part 4: Special requirements for frequency meters
国家标准
GB/T 22264.5-2022
现行
安装式数字显示电测量仪表 第5部分:相位表和功率因数表的特殊要求
Mounted digital display electric measuring instruments—Part 5:Special requirements for phase meters and power factor meters
国家标准
GB/T 7676.1-2017
现行
直接作用模拟指示电测量仪表及其附件 第1部分:定义和通用要求
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 1:Definitions and general requirements common to all parts
国家标准
GB/T 29871-2013
现行
能源计量仪表通用数据接口技术协议
General data interface technology protocol of energy metering instrument
国家标准
GB/T 7724-2023
现行
电子称重仪表
Electronic weighing indicator
国家标准
GB/T 15474-2010
现行
核电厂安全重要仪表和控制功能分类
Classification on instrumentation and control function of instrumentation and control systems important to safety for nuclear power plants
国家标准
GB/T 7676.8-2017
现行
直接作用模拟指示电测量仪表及其附件 第8部分:附件的特殊要求
Direct acting indicating analogue electrical measuring instruments and their accessories—Part 8:Special requirements for accessories
行业标准
NB/T 20296-2014
现行
核电厂安全重要电气、仪表和控制设备维修要求
国家标准
GB/T 34036-2017
现行
智能记录仪表 通用技术条件
Intelligent recorder—General technical requirements
国家标准
GB/T 29308-2012
现行
核电厂安全重要仪表和控制系统老化管理要求
Management requirement of ageing of instrumentation and control systems important to safety for nuclear power plants
国家标准
GB/T 2900.90-2012
现行
电工术语 电工电子测量和仪器仪表 第4部分:各类仪表的特殊术语
Electrotechnical terminology - Electrical and electronic measurements and measuring instruments - Part 4: Specific terms according to the type of instruments
国家标准
GB/T 20730.2-2019
现行
工业过程控制系统用模拟输入两位或多位输出仪表 第2部分:检查和例行试验导则
Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems—Part 2: Guidance for inspection and routine testing
国家标准
GB/T 33951-2017
现行
精密仪器仪表和电讯器材用铜合金棒线
Copper alloy rod and wire for precision telecommunications equipment and instrument
国家标准
GB 14052-1993
现行
安装在设备上的同位素仪表的辐射安全性能要求
Radionuclide gauges--Gaugesdesigned for permanent installation
国家标准
GB/T 43107-2023
现行
核电站仪表引压用不锈钢无缝钢管
Seamless stainless steel tubes for instrumentation pressure connecting for nuclear power plants
国家标准
GB/T 12726.4-2013
现行
核电厂安全重要仪表 事故及事故后辐射监测 第4部分:工艺流管内或管旁放射性连续监测设备
Nuclear power plants―Instrumentation important to safety―Radiation monitoring for accident and post-accident conditions―Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams
国家标准
GB/T 7259-1987
现行
模拟式过程测量和控制仪表性能表示方法 导则
Guidelines for presenting performance of analog process measurement and control instrument
国家标准
GB/T 13632.2-2006
现行
监督压水堆堆芯充分冷却的测量要求 第2部分:冷停堆期间监测仪表的要求
Measurements for monitoring adequate cooling within the core of pressurized light water reactors Part 2: Instrumentation requirements during cold shutdown
国家标准
GB/T 7676.4-2017
现行
直接作用模拟指示电测量仪表及其附件 第4部分:频率表的特殊要求
Direct acting indicating analogue electrical measuring instruments and their accessories—Part 4:Special requirements for frequency meters
国家标准
GB/T 43347-2023
现行
核电厂安全重要电气、仪表与控制设备环境参数的监测
Environmental parameter monitoring of electrical,instrumentation and control equipment important to safety for nuclear power plants
国家标准
GB/T 14282.3-2006
现行
仪表着陆系统(ILS)第3部分: 航向信标性能要求和测试方法
Instrument landing system (ILS) - Part 3: Performance requirements and test methods for ILS localizer
国家标准
GB/T 6809.1-2009
现行
往复式内燃机 零部件和系统术语 第1部分:固定件及外部罩盖
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers