《GB/T 20975.26-2013 铝及铝合金化学分析方法 第26部分:碳含量的测定 红外吸收法(外文版EN)》标准查询解读、电子版标准下载
GB/T 20975.26-2013
现行
铝及铝合金化学分析方法 第26部分:碳含量的测定 红外吸收法(外文版EN)
Methods for chemical analysis of aluminium and aluminium alloys - Part 26:Determination of carbon content infrared absorption method
《GB/T 20975.26-2013 铝及铝合金化学分析方法 第26部分:碳含量的测定 红外吸收法(外文版EN)》标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 2910.3-2009
现行
纺织品 定量化学分析 第3部分:醋酯纤维与某些其他纤维的混合物(丙酮法)
Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone)
国家标准
GB/T 6150.7-2008
现行
钨精矿化学分析方法 钽铌量的测定 等离子体发射光谱法和分光光度法
Methods for chemical analysis of tungsten concentrates - Determination of tantalum content and niobium content - Inductively coupled plasma emission spectrometry and spectrophotometry
国家标准
GB/T 4103.5-2012
现行
铅及铅合金化学分析方法 第5部分:铋量的测定
Methods for chemical analysis of lead and lead alloys - Part 5: Determination of bismuth content
行业标准
YS/T 1171.5-2017
现行
再生锌原料化学分析方法 第5部分:氟量和氯量的测定 离子色谱法
行业标准
YS/T 461.9-2013
废止
混合铅锌精矿化学分析方法 第9部分:银量的测定 火焰原子吸收光谱法
国家标准
GB/T 5121.24-2008
现行
铜及铜合金化学分析方法 第24部分:硒、碲含量的测定
Methods for chemical analysis of copper and copper alloys - Part 24:Determination of selenium and tellurium content
行业标准
YS/T 248.6-2007
现行
粗铅化学分析方法 金量和银量的测定 火试金法
国家标准
GB/T 26416.2-2022
现行
稀土铁合金化学分析方法 第2部分:稀土杂质含量的测定 电感耦合等离子体发射光谱法
Chemical analysis method for rare earth ferroalloy—Part 2: Determination of rare earth impurity contents—Inductively coupled plasma emission spectrometry
国家标准
GB/T 15076.12-2008
现行
钽铌化学分析方法 钽中磷量的测定
Methods for chemical analysis of tantalum and niobium - Determination of phosphorus content in tantalum
国家标准
GB/T 35657-2017
现行
化学分析方法验证确认和内部质量控制实施指南 基于样品消解的金属组分分析
Guideline for verification and validation of chemical analysis method and internal quality control-Metal component analysis based on sample digestion
国家标准
GB/T 14352.13-2010
现行
钨矿石、钼矿石化学分析方法 第13部分:锡量测定
Methods for chemical analysis of tungsten ores and molybdenum ores - Part 13:Determination of tin content
国家标准
GB/T 11064.6-2013
现行
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第6部分:镁量的测定 火焰原子吸收光谱法
Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 6: Determination of magnesium content - Flame atomic absorption spectrometric method
国家标准
GB/T 1819.9-2017
现行
锡精矿化学分析方法 第9部分:三氧化钨量的测定 硫氰酸盐分光光度法
Methods for chemical analysis of tin concentrates—Part 9:Determination of tungsten trioxide content—The thiocyanate spectrophotometric method
国家标准
GB/T 4324.14-2012
现行
钨化学分析方法 第14部分:氯化挥发后残渣量的测定 重量法
Methods for chemical analysis of tungsten - Part 14: Determination of residue content after chloride volatility - Gravimetric method
国家标准
GB/T 5121.9-2008
现行
铜及铜合金化学分析方法 第9部分:铁含量的测定
Methods for chemical analysis of copper and copper alloys - Part 9:Determination of iron content
行业标准
YS/T 922-2013
现行
高纯铜化学分析方法 痕量杂质元素含量的测定 辉光放电质谱法
国家标准
GB/T 15072.6-2008
废止
贵金属合金化学分析方法 铂、钯合金中铱量的测定 硫酸亚铁电流滴定法
Test method of precious metal alloys - Determination of iridium contents for platinum, palladium alloys - Electricity titration with ferrous sulfate
行业标准
YS/T 1382-2020
现行
银铜磷合金化学分析方法 磷含量的测定 磷钼黄分光光度法
国家标准
GB/T 4734-2022
现行
日用陶瓷材料及制品化学分析方法
Test methods of chemical analysis for domestic ceramic materials and articles
国家标准
GB/T 13747.5-2019
现行
锆及锆合金化学分析方法 第5部分:铝量的测定 铬天青S-氯化十四烷基吡啶分光光度法
Methods for chemical analysis of zirconium and zirconium alloys—Part 5:Determination of aluminium content—Chronic azurol-S-tetradrcylpyridine chloride spectrophotometry
行业标准
YS/T 575.16-2007
现行
铝土矿石化学分析方法 第16部分:五氧化二磷含量的测定 钼蓝光度法
国家标准
GB/T 15076.15-2008
现行
钽铌化学分析方法 氢量的测定
Methods for chemical analysis of tantalum and niobium - Determination of hydrogen content
行业标准
YS/T 1345.5-2020
现行
高铋铅化学分析方法 第5部分:铜含量的测定 火焰原子吸收光谱法
行业标准
YS/T 568.3-2008
现行
氧化锆、氧化铪化学分析方法 硅量的测定 钼蓝分光光度法
国家标准
GB/T 12690.10-2003
现行
稀土金属及其氧化物中非稀土杂质化学分析方法 磷量的测定 钼蓝分光光度法
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
国家标准
GB/T 33965-2017
现行
金属材料 拉伸试验 矩形试样减薄率的测定(外文版EN)
Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen