GB/T 15076.11-2020 标准详情
GB/T 15076.11-2020
现行
钽铌化学分析方法 第11部分:铌中砷、锑、铅、锡和铋量的测定 直流电弧原子发射光谱法
Methods for chemical analysis of tantalum and niobium—Part 11:Determination of arsenic,antimony,lead,tin and and bismuth contents in niobium—Direct current arc atomic emission spectrometry
标准内容导航
标准状态
标准信息
相似标准推荐
行业标准
YB 4019-1991
现行
轻烧菱镁矿粉化学分析方法柠檬酸法测定轻烧菱镁矿粉的活性
行业标准
YB/T 4419.3-2014
现行
转底炉法金属化球团化学分析方法 钾和钠含量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 5121.18-2008
现行
铜及铜合金化学分析方法 第18部分:镁含量的测定
Methods for chemical analysis of copper and copper alloys - Part 18:Determination of magnesium content
国家标准
GB/T 22571-2017
现行
表面化学分析 X射线光电子能谱仪 能量标尺的校准
Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
行业标准
YS/T 575.10-2007
现行
铝土矿石化学分析方法 第10部分:氧化锰含量的测定 火焰原子吸收光谱法
行业标准
YS/T 990.18-2014
现行
冰铜化学分析方法 第18部分:铅、锌、镍、砷、铋、锑、钙、镁、镉、钴量的测定 电感耦合等离子体原子发射光谱法
行业标准
YS/T 1344.3-2020
现行
掺锡氧化铟粉化学分析方法 第3部分:物相分析 X射线衍射分析法
国家标准
GB/T 6609.4-2004
现行
氧化铝化学分析方法和物理性能测定方法 邻二氮杂菲光度法测定三氧化二铁含量
Chemical analysis methods and determination of physical performance of alumina--Determination of ferric oxide content--Orthophenanthroline photometric method
国家标准
GB/T 30815-2014
现行
表面化学分析 分析样品的制备和安装方法指南
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis
国家标准
GB/T 4698.3-2017
现行
海绵钛、钛及钛合金化学分析方法 第3部分:硅量的测定 钼蓝分光光度法
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 3:Determination of silicon content—Molybdenum blue spectrophotometry
国家标准
GB/T 19500-2025
现行
表面化学分析 X射线光电子能谱分析方法通则
Surface chemical analysis—General rules for X-ray photoelectron spectroscopic analysis method
国家标准
GB/T 12689.4-2004
现行
锌及锌合金化学分析方法 铜量的测定 二乙基二硫代氨基甲酸铅分光光度法、火焰原子吸收光谱法和电解法
The methods for chemical analysis of zinc and zinc alloys--The determination of copper content--The lead diethyldithio-carbamate spectrophotometric method and the flame atomic absorption spectrometric method and the electrolytic method
行业标准
YS/T 807.4-2012
现行
铝中间合金化学分析方法 第4部分:铬含量的测定 过硫酸铵氧化-硫酸亚铁铵滴定法
行业标准
YS/T 536.6-2009
现行
铋化学分析方法 铅量的测定 电热原子吸收光谱法
国家标准
GB/T 4325.9-2013
现行
钼化学分析方法 第9部分:镍量的测定 丁二酮肟分光光度法和火焰原子吸收光谱法
Methods for chemical analysis of molybdenum - Part 9: Determination of nickel content - Dimethylglyoxime spectrophotometry and flame atomic absorption spectrometry
行业标准
YS/T 535.1-2009
现行
氟化钠化学分析方法 第1部分:湿存水含量的测定 重量法
国家标准
GB/T 223.42-1985
现行
钢铁及合金化学分析方法 离子交换分离-溴邻苯三酚红光度法测定钽量
Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalumcontent
行业标准
YS/T 1149.3-2016
现行
锌精矿焙砂化学分析方法 第3部分:硫量的测定 燃烧中和滴定法
国家标准
GB/T 10574.6-2003
现行
锡铅焊料化学分析方法 铜量的测定
Methods for chemical analysis of tin-lead solders--Determination of copper content
行业标准
FZ/T 01102-2009
现行
纺织品 大豆蛋白复合纤维混纺产品定量化学分析方法
国家标准
GB/T 15076.7-2020
现行
钽铌化学分析方法 第7部分:铌中磷量的测定 4-甲基-戊酮-[2]萃取分离磷钼蓝分光光度法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of tantalum and niobium—Part 7:Determination of phospherus content in niobium—4-Formyloxy-pentyl ketone-[2] extraction separation phosphomolybdate blue spectrophotometry and inductively coupled plasma atomic emission spectrom
国家标准
GB/T 3884.17-2014
现行
铜精矿化学分析方法 第17部分:三氧化二铝量的测定 铬天青S胶束增溶光度法和沉淀分离-氟盐置换-Na2EDTA滴定法
Methods for chemical analysis of copper concentrates―Part 17:Determination of aluminium oxide content―Chromazurol S spectrophotometric method and fluoride salts device-Na2EDTA titrimetric method
国家标准
GB/T 34500.1-2017
现行
稀土废渣、废水化学分析方法 第1部分:氟离子量的测定 离子选择电极法
Chemical analysis methods for rare earth residue and waste water—Part 1:Determination of fluorine content—Ion selective electrode analysis
国家标准
GB/T 14849.4-2014
现行
工业硅化学分析方法 第4部分:杂质元素含量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of silicon metal―Part 4:Determination of impurity contents―Inductively coupled plasma atomic emission spectrometric method
国家标准
GB/T 12689.7-2010
现行
锌及锌合金化学分析方法 第7部分: 镁量的测定 火焰原子吸收光谱法
Methods for chemical analysis of zinc and zinc alloys - Part 7:Determination of magnesium content - Flame atomic absorption spectrometric method
国家标准
GB/T 26749-2022
现行
碳纤维 浸胶纱拉伸性能的测定
Carbon fibre—Determination of tensile properties of resin-impregnated yarn