GB/T 23364.2-2009 标准详情
GB/T 23364.2-2009
现行
高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法
Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry
标准内容导航
标准状态
标准信息
相似标准推荐
行业标准
JB/T 6237.10-2008
现行
电触头材料用银粉化学分析方法 第10部分:重量法测定氯化银含量
行业标准
YS/T 239.4-2010
现行
三硫化二锑化学分析方法 第4部分:王水不溶物的测定 重量法
行业标准
YB 4004-1991
现行
优质镁砂化学分析方法二安替比林甲烷光度法测定二氧化钛量
国家标准
GB/T 42513.3-2023
现行
镍合金化学分析方法 第3部分:铝含量的测定 一氧化二氮-火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of nickel alloys—Part 3:Determination of aluminium content—Nitrous oxide- flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 3884.4-2025
即将实施
铜精矿化学分析方法 第4部分:铅、锌、镉、镍和氧化镁含量的测定 火焰原子吸收光谱法
Methods for chemical analysis of copper concentrates—Part 4:Determination of lead,zinc,cadmium,nickel and magnesium oxide contents—Flame atomic absorption spectrometry method
行业标准
YS/T 575.4-2007
现行
铝土矿石化学分析方法 第4部分:三氧化二铁含量的测定 重铬酸钾滴定法
行业标准
YS/T 74.8-2010
现行
镉化学分析方法 第8部分:铊量的测定 结晶紫分光光度法
国家标准
GB/T 7739.8-2022
现行
金精矿化学分析方法 第8部分:硫量的测定
Methods for chemical analysis of gold concentrates—Part 8: Determination of sulfur content
国家标准
GB/T 4949-2026
即将实施
铝-锌-铟系合金牺牲阳极化学分析方法
Chemical analysis methods for sacrificial anode of Al-Zn-In system alloy
国家标准
GB/T 6609.29-2004
现行
氧化铝化学分析方法和物理性能测定方法 吸附指数的测定
Chemical analysismethods and determination of physical performance of alumina--Determination of an absorption index
行业标准
JC/T 1021.9-2007
现行
非金属矿物和岩石化学分析方法 第9部分: 水镁石矿化学分析方法
国家标准
GB/T 23275-2009
现行
钌粉化学分析方法 铅、铁、镍、铝、铜、银、金、铂、铱、钯、铑、硅量的测定 辉光放电质谱法
Methods for chemical analysis of ruthenium determination of lead, iron, nickel, aluminum, copper, silver, gold, platinum, palladium, rhodium, iridium and silicon in ruthenium powder by glow discharge mass spectrometry
行业标准
YS/T 535.10-2009
现行
氟化钠化学分析方法 第10部分:试样的制备和贮存
国家标准
GB/T 26417-2010
现行
镨钕合金及其化合物化学分析方法 稀土配分量的测定
Chemical analysis methods of praseodymium-neodymium alloy and the compounds - Determination of REO relative contents
国家标准
GB/T 3260.9-2013
现行
锡化学分析方法 第9部分:硫量的测定 高频感应炉燃烧红外吸收法
Methods for chemical analysis of tin―Part 9: Determination of sulphur content―Infra-red absorption method after high frequency induction furnace
国家标准
GB/T 3253.1-2008
现行
锑及三氧化二锑化学分析方法 砷量的测定 砷钼蓝分光光度法
Methods for chemical analysis of antimony and antimony trioxide - Determination of arsenic content - Arsenic molybdenum blue spectrophotometric method
国家标准
GB/T 34174-2017
现行
表面化学分析 工作参考物质中离子注入产生的驻留面剂量定值的推荐程序
Surface chemical analysis—Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
国家标准
GB/T 14352.12-2010
现行
钨矿石、钼矿石化学分析方法 第12部分:银量测定
Methods for chemical analysis of tungsten ores and molybdenum ores - Part 12:Determination of silver content
国家标准
GB/T 18116.2-2008
现行
氧化钇铕化学分析方法 氧化铕量的测定
Chemical analysis methods of Yttrium-europium oxides - Determination of europium oxides
国家标准
GB/T 40110-2021
现行
表面化学分析 全反射X射线荧光光谱法(TXRF)测定硅片表面元素污染
Surface chemical analysis—Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy
国家标准
GB/T 37211.1-2018
现行
金属锗化学分析方法 第1部分:砷含量的测定 砷斑法
Methods for chemical analysis of germanium metal—Part 1:Determination of arsenic content—Arsenic stain method
行业标准
YS/T 1171.10-2017
现行
再生锌原料化学分析方法 第10部分:氧化锌量的测定 Na2EDTA滴定法
国家标准
GB/T 2910.24-2009
现行
纺织品 定量化学分析 第24部分:聚酯纤维与某些其他纤维的混合物(苯酚/四氯乙烷法)
Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane)
国家标准
GB/T 223.74-1997
现行
钢铁及合金化学分析方法 非化合碳含量的测定
Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gas-volumetric method for the determination of non-combined carbon content
国家标准
GB/T 4324.8-2008
现行
钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法
Methods for chemical analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry
国家标准
GB/T 39545.1-2022
现行
闭式齿轮传动装置的零部件设计和选择 第1部分:通用零部件
Design and selection of components for enclosed gear drives—Part 1: Common components