YS/T 509.6-2008 标准详情
YS/T 509.6-2008
现行
锂辉石、锂云母精矿化学分析方法 五氧化二磷量的测定 钼蓝分光光度法
标准内容导航
标准状态
标准信息
起草单位
新疆锂盐厂、宜春钽铌矿等
起草人
季娟娟、夏淑芬 等
相似标准推荐
国家标准
GB/T 4324.28-2012
现行
钨化学分析方法 第28部分:钼量的测定 硫氰酸盐分光光度法
Methods for chemical analysis of tungsten - Part 28: Determination of molybdenum content - The thioyanate spectrophotometry
国家标准
GB/T 4325.22-2013
现行
钼化学分析方法 第22部分:磷量的测定 钼蓝分光光度法
Methods for chemical analysis of molybdenum - Part 22:Determination of phosphorus content - Molybdenum blue spectrophotometry
国家标准
GB/T 34499.1-2017
现行
铱化合物化学分析方法 第1部分:铱量的测定 硫酸亚铁电流滴定法
Method for chemical analysis of iridium compounds—Part 1: Determination of iridium content—Electricity titration using ferrous sulfate
行业标准
JB/T 6237.2-2008
现行
电触头材料用银粉化学分析方法 第2部分:双环己酮草酰二腙分光光度法测定铜量
国家标准
GB/T 1819.17-2017
现行
锡精矿化学分析方法 第17部分:汞量的测定 原子荧光光谱法
Methods for chemical analysis of tin concentrates—Part 17:Determination of mercury content—Atomic fluorescence spectrometric method
行业标准
YS/T 252.4-2007
现行
高镍锍化学分析方法 铜量的测定 硫代硫酸钠滴定法
国家标准
GB/T 11066.8-2009
现行
金化学分析方法 银、铜、铁、铅、锑、铋、钯、镁、镍、锰和铬量的测定 乙酸乙酯萃取-电感耦合等离子体原子发射光谱法
Method for chemical analysis of gold - Determination of silver, copper, iron, lead, antimony, bismuth, palladium, magnesium, nickel, manganese and chromium content - Ethyl acetate extration-inductively coupled plasma - Atomic emission spectrometry
行业标准
YS/T 1200.1-2017
现行
1,1’-双二苯基膦二茂铁二氯化钯化学分析方法 第1部分:钯量的测定 丁二酮肟重量法
国家标准
GB/T 20931.5-2007
现行
锂化学分析方法 硅量的测定 硅钼蓝分光光度法
Methods for chemical analysis of lithium - Determination of silicon content - Molybdenum blue spectrophotometric method
行业标准
YS/T 745.2-2016
现行
铜阳极泥化学分析方法 第2部分:金量和银量的测定 火试金重量法
国家标准
GB/T 20899.8-2022
现行
金矿石化学分析方法 第8部分:硫量的测定
Methods for chemical analysis of gold ores—Part 8: Determination of sulfur content
行业标准
YS/T 820.10-2012
现行
红土镍矿化学分析方法 第10部分:钙、钴、铜、镁、锰、镍、磷和锌量的测定 电感耦合等离子体-原子发射光谱法
国家标准
GB/T 14506.32-2019
现行
硅酸盐岩石化学分析方法 第32部分:三氧化二铝等20个成分量测定 混合酸分解-电感耦合等离子体原子发射光谱法
Methods for chemical analysis of silicate rocks—Part 32: Determination of 20 components including aluminium oxide etc.—Mixed acid digestion-inductively coupled plasma atomic emission spectrometry
国家标准
GB/T 22662.6-2008
现行
氟钛酸钾化学分析方法 第6部分:铁含量的测定 火焰原子吸收光谱法
Chemical analysis methods of potassium fluotitanate - Part 6: Determination of iron - Flame atomic absorption spectrometric method
国家标准
GB/T 11064.6-2013
现行
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第6部分:镁量的测定 火焰原子吸收光谱法
Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 6: Determination of magnesium content - Flame atomic absorption spectrometric method
国家标准
GB/T 4103.11-2012
现行
铅及铅合金化学分析方法 第11部分:锌量的测定
Methods for chemical analysis of lead and lead alloys - Part 11: Determination of zinc content
行业标准
YS/T 1179.4-2017
现行
铝渣化学分析方法 第4部分:硅、镁、钙含量的测定 电感耦合等离子体发射光谱法
行业标准
YS/T 1158.3-2016
现行
铜铟镓硒靶材化学分析方法 第3部分:铝、铁、镍、铬、锰、铅、 锌、镉、钴、钼、钡、镁量的测定 电感耦合等离子体质谱法
国家标准
GB/T 20255.6-2008
现行
硬质合金化学分析方法 火焰原子吸收光谱法 一般要求
Methods for chemical analysis of hardmetals - Flame atomic absorption spectrometry - General requirements
国家标准
GB/T 223.58-1987
现行
钢铁及合金化学分析方法 亚砷酸钠-亚硝酸钠滴定法测定锰量
Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
国家标准
GB/T 223.78-2000
现行
钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量
Methods for chemical analysis of iron,steel and alloy--Curcumin spectrophotometric method for the determination of boron content
国家标准
GB/T 1819.9-2017
现行
锡精矿化学分析方法 第9部分:三氧化钨量的测定 硫氰酸盐分光光度法
Methods for chemical analysis of tin concentrates—Part 9:Determination of tungsten trioxide content—The thiocyanate spectrophotometric method
行业标准
YS/T 1157.1-2016
现行
粗氢氧化钴化学分析方法 第1部分:钴量的测定 电位滴定法
国家标准
GB/T 12690.1-2022
现行
稀土金属及其氧化物中非稀土杂质化学分析方法 第1部分:碳、硫量的测定 高频-红外吸收法
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides—Part 1:Determination of carbon and sulfur contents—High frequency-infrared absorption method
国家标准
GB/T 39143-2020
现行
金砷合金化学分析方法 砷含量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of gold-arsenic alloys—Determination of arsenic content—Inductively coupled plasma atomic emission spectrometry
行业标准
YS/T 349.3-2010
现行
硫化钴精矿化学分析方法 第3部分:锰量的测定 火焰原子吸收光谱法