YS/T 833-2020 标准详情
YS/T 833-2020
现行
铼酸铵化学分析方法 铍、镁、铝、钾、钙、钛、铬、锰、铁、钴、铜、锌、钼、铅、钨、钠、锡、镍、硅量的测定 电感耦合等离子体原子发射光谱法
标准内容导航
标准状态
标准信息
适用范围
本标准适用于铼酸铵中铍、镁、铝、钾、钙、钛、铬、锰、铁、钴、铜、锌、钼、铅、钨、钠、锡、镍、硅含量的测定。
相似标准推荐
行业标准
LY/T 1275-1999
现行
森林土壤水化学分析
行业标准
YS/T 746.16-2010
现行
无铅锡基焊料化学分析方法 第16部分:稀土含量的测定 偶氮胂Ⅲ分光光度法
行业标准
YS/T 938.4-2013
现行
齿科烤瓷修复用金基和钯基合金化学分析方法 第4部分:金、铂、钯、铜、锡、铟、锌、镓、铍、铁、锰、锂量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 4103.10-2012
现行
铅及铅合金化学分析方法 第10部分:银量的测定
Methods for chemical analysis of lead and lead alloys - Part 10: Determination of silver content
国家标准
GB/T 18115.4-2021
现行
稀土金属及其氧化物中稀土杂质化学分析方法 第4部分:钕中镧、铈、镨、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定
Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 4: Determination of lanthanum, cerium, praseodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium contents in neodymium metal and oxide
国家标准
GB/T 4324.19-2012
现行
钨化学分析方法 第19部分:钛量的测定 二安替比林甲烷分光光度法
Methods for chemical analysis of tungsten - Part 19: Determination of titanium content - The diantipyrylmethane photometric spectrophtometry
国家标准
GB/T 13747.11-2017
现行
锆及锆合金化学分析方法 第11部分:钼量的测定 硫氰酸盐分光光度法
Methods for chemical analysis of zirconium and zirconium alloys—Part 11: Determination of molybdenum content—Thiocyanate spectrophotometry
行业标准
YS/T 509.3-2008
现行
锂辉石、锂云母精矿化学分析方法 二氧化硅量的测定 重量-钼蓝分光光度法
行业标准
YS/T 586-2006
现行
铜及铜合金化学分析方法 电感耦合等离子体原子发射光谱法
国家标准
GB/T 11064.11-2013
现行
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第11部分:酸不溶物量的测定 重量法
Methods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 11: Determination of acid-insolubles content - Gravimetric method
国家标准
GB/T 5121.2-2008
现行
铜及铜合金化学分析方法 第2部分:磷含量的测定
Methods for chemical analysis of copper and copper alloys - Part 2:Determination of phosphorus content
国家标准
GB/T 23278.6-2009
现行
锡酸钠化学分析方法 第6部分:游离碱的测定 中和滴定法
Methods for chemical analysis of sodium stannate - Part 6: Determination of free alkali content - Titration
国家标准
GB/T 20899.3-2019
现行
金矿石化学分析方法 第3部分:砷量的测定
Methods for chemical analysis of gold ores—Part 3:Determination of arsenic content
行业标准
YS/T 1120.3-2016
现行
金锡合金化学分析方法 第3部分:铁、铜、银、铅、钯、镉、锌量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 23362.2-2009
现行
高纯氢氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法
Methods for chemical analysis of high purity indium hydroxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry
国家标准
GB/T 13747.15-2017
现行
锆及锆合金化学分析方法 第15部分:硼量的测定 姜黄素分光光度法
Methods for chemical analysis of zirconium and zirconium alloys—Part 15:Determination of boron content—Curcumin spectrophotometry
国家标准
GB/T 6609.24-2004
现行
氧化铝化学分析方法和物理性能测定方法 安息角的测定
Chemical analysis methods and determination of physical performance of alumina--Measurement of the angle of repose
国家标准
GB/T 14506.20-2010
现行
硅酸盐岩石化学分析方法 第20部分:锌量测定
Methods for chemical analysis of silicate rocks - Part 20: Determination of zinc content
国家标准
GB/T 8151.4-2012
现行
锌精矿化学分析方法 第4部分:二氧化硅量的测定 钼蓝分光光度法
Methods for chemical analysis of zinc concentrates - Part 4: Determination of silicon dioxide content - Molybdenum blue spectrophotometry
行业标准
YS/T 1149.8-2016
现行
锌精矿焙砂化学分析方法 第8部分:酸溶二氧化硅量的测定 钼蓝分光光度法
国家标准
GB/T 6150.19-2025
现行
钨精矿化学分析方法 第19部分:氟含量的测定 离子选择电极法
Methods for chemical analysis of tungsten concentrates—Part 19:Determination of fluoride content—Ion selective electrode method
国家标准
GB/T 223.78-2000
现行
钢铁及合金化学分析方法 姜黄素直接光度法测定硼含量
Methods for chemical analysis of iron,steel and alloy--Curcumin spectrophotometric method for the determination of boron content
国家标准
GB/T 14635-2020
现行
稀土金属及其化合物化学分析方法 稀土总量的测定
Rare earth metals and their compounds—Determination of total rare earth content
国家标准
GB/T 39138.1-2020
现行
金镍铬铁硅硼合金化学分析方法 第1部分:金含量的测定 硫酸亚铁电位滴定法
Methods for chemical analysis of gold nickel chromium iron silicon boron alloys—Part 1:Determination of gold content—Potentiometric titration using ferrous sulfate
国家标准
GB/T 40129-2021
现行
表面化学分析 二次离子质谱 飞行时间二次离子质谱仪质量标校准
Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
行业标准
YS/T 791-2012
现行
铂靶