标准分类
仪器标准查询
国家标准
GB/T 13606-2007
现行
土工试验仪器 岩土工程仪器 振弦式传感器通用技术条件
Instrument for geotechnical engineering - General specifications of vibrating wire sensor
国家标准
GB/T 21978.6-2008
现行
降水量观测仪器 第6部分:融雪型雨雪量计
Intrument for precipitation observation - Part 6: Melted snow type rain and snow recorder
国家标准
GB/T 30429-2013
现行
工业热电偶
Industrial thermocouple assemblies
国家标准
GB/T 27501-2011
现行
pH值测定用缓冲溶液制备方法
Preparation method of buffer solutions for the measurement of pH value
国家标准
GB/T 10590-2006
现行
高低温/ 低气压试验箱技术条件
Specifications for high and low temperature/low air pressure testing chambers
国家标准
GB/T 22264.1-2022
现行
安装式数字显示电测量仪表 第1部分:定义和通用要求
Mounted digital display electric measuring instruments—Part 1:Definitions and general requirements common to all parts
国家标准
GB/T 17117-2008
现行
双目望远镜
Binoculars
国家标准
GB/T 44992-2024
现行
谐波有功电能表检验装置
Testing equipment for harmonic meters of active energy
国家标准
GB/T 3159-2008
现行
液压式万能试验机
Hydraulic universal testing machines
国家标准
GB/T 15489.1-1995
现行
滤光玻璃测试方法 光谱特性
Colour filter glass test methods--Spectral character-istic
国家标准
GB/T 21191-2007
现行
原子荧光光谱仪
Atomic fluorescence spectrometer
国家标准
GB/T 15617-2025
即将实施
微束分析 电子探针显微分析 硅酸盐矿物的定量分析
Microbeam analysis—Electron probe microanalysis—Quantitative analysis of silicate minerals
国家标准
GB/T 34831-2017
现行
纳米技术 贵金属纳米颗粒电子显微镜成像 高角环形暗场法
Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High angle annular dark field imaging method
国家标准
GB/T 30241.1-2013
现行
齐纳二极管安全栅 第1部分:通用技术条件
Zener diode safety barrier―Part 1: General technical specification
国家标准
GB/T 32200-2015
现行
放映银幕特性参数和测定方法
Characteristic parameter and measurement of projection screens
国家标准
GB/T 43436-2023
现行
智能工厂 面向柔性制造的自动化系统 通用要求
Smart factory—Automation system for flexible manufacturing—General requirement
国家标准
GB/T 27504-2011
现行
压力表误差表
Pressure gauge error table
国家标准
GB/T 32196-2015
现行
无损检测仪器 型号编制方法
Non-destructive testing instruments—Model designation method
国家标准
GB/T 38854-2020
现行
智能工厂 生产过程控制数据传输协议
Smart factory—Transfer protocol of production process control data
国家标准
GB/T 41805-2022
现行
光学元件表面疵病定量检测方法 显微散射暗场成像法
Methodology for the quantitative inspection of the defect on optics surface—Microscopic scattering dark-field imaging
国家标准
GB/T 38843-2020
现行
智能仪器仪表的数据描述 执行机构
Data description of smart instrumentation—Actuators
地方标准
DB44/T 2028-2017
现行
地表水自动监测系统数据传输规范
地方标准
DB1306/T 294-2025
现行
检验检测机构服务质量提升指南
地方标准
DB43/T 2195-2021
现行
水环境中可卡因和苯甲酰爱康宁含量的测定 液相色谱-串联质谱法
地方标准
DB4403/T 294-2022
现行
多功能智能杆气象监测建设规范
国家标准
GB/T 17362-2008
现行
黄金制品的扫描电镜X射线能谱分析方法
Analysis method for gold products with X-ray EDS in SEM
国家标准
GB/T 26830-2011
现行
无损检测仪器 高频恒电位工业X射线探伤机
Non-destructive testing instruments - High frequency constant potential X-ray equipment
国家标准
GB/Z 12414-2021
现行
药用玻璃管
Pharmaceutical glass tube
国家标准
GB/T 7962.19-2010
现行
无色光学玻璃测试方法 第19部分:磨耗度
Test methods of colourless optical glass - Part 19: Abration factor
国家标准
GB/T 30434-2013
现行
电阻真空计通用技术条件
General specifications for resistance vacuum gauge
国家标准
GB/T 25919.1-2010
现行
Modbus测试规范 第1部分:Modbus串行链路一致性测试规范
Modbus test specification - Part 1: Modbus conformance test specification over serial link
国家标准
GB/T 22541-2008
现行
土工试验仪器 击实仪
Instrument for soil test - Compaction apparatus
国家标准
GB/Z 14482-2022
现行
机械计数器
Mechanical counter
国家标准
GB/T 7676.2-2017
现行
直接作用模拟指示电测量仪表及其附件 第2部分:电流表和电压表的特殊要求
Direct acting indicating analogue electrical measuring instruments and their accessories—Part 2:Special requirements for ammeters and voltmeters
国家标准
GB/T 21997.1-2008
现行
土工试验仪器 液限仪 第1部分:碟式液限仪
Instrument for soil test - Liquid limit device - Part 1:Casagrande liquid limit device
国家标准
GB/T 30111-2025
现行
星敏感器通用规范
General specification for star sensor
国家标准
GB/T 44883-2024
现行
流程生产能效管控系统 设计要求
Energy efficiency control system in process production—Design requirements
国家标准
GB/T 3371-2013
现行
光学分度头
Optical dividing head
国家标准
GB/T 26497-2022
现行
电子天平
Electronic balances
国家标准
GB/T 33707-2017
现行
气象太阳模拟器
Meteorological solar simulator
国家标准
GB/T 11884-2008
现行
弹簧度盘秤
Spring dial scale
地方标准
DB15/T 3739-2024
现行
电力互感器运行状态在线评价技术规范
国家标准
GB/T 32653-2016
现行
微机械系统加速度检波器
Microelectro mechanical system acceleration geophone
国家标准
GB/T 26813-2011
现行
双光束紫外可见分光光度计
Double beam UV/VIS spectrophotometer
国家标准
GB/T 26595-2011
现行
无损检测仪器 周向X射线管技术条件
Non-destructive testing instruments - Specification for panoramic X-ray tube
国家标准
GB/T 38845-2020
现行
智能仪器仪表的数据描述 定位器
Data description of smart instrumentation—Positioners
国家标准
GB/T 32710.2-2016
现行
环境试验仪器及设备安全规范 第2部分:低温恒温循环装置
Safety requirements for environmental testing and conditioning equipment—Part 2: Refrigerated circulators
国家标准
GB/T 36016-2018
现行
铠装连续热电偶电缆及铠装连续热电偶
Sheathed continuous thermocouple cables and sheathed continuous thermocouple
国家标准
GB/T 36979-2018
现行
LED产品空间颜色分布测量方法
Measuring method of spatial distribution of color characteristics for LED products
国家标准
GB/T 26795-2011
现行
数控定量水表
Numerical batch control water meter
国家标准
GB/T 26833-2011
现行
无损检测仪器 工业用X射线管通用技术条件
Non-destructive testing instruments - General specification for X-ray tube for industrial detecting
地方标准
DB37/T 4649.5-2023
现行
智能制造 第5部分:系统解决方案供应商能力成熟度评估指南
国家标准
GB/T 13334-2008
现行
复印机调试板 A3
Adjusting test chart for copying machine A3
国家标准
GB/T 35597-2017
现行
微波炉用玻璃托盘
Glass trays for microwave oven
国家标准
GB/T 25929-2010
现行
红外线气体分析器 技术条件
Specification of infrared gas analyzers
国家标准
GB/T 26804.5-2011
现行
工业控制计算机系统 功能模块模板 第5部分:数字量输入输出通道模板通用技术条件
Industrial control computer system - Function module - Part 5: General specification for digital input/output channel modules
国家标准
GB/T 31983.31-2017
现行
低压窄带电力线通信 第31部分:窄带正交频分复用电力线通信 物理层规范
Narrow band power line communication over low-voltage mains—Part 31:Narrow band orthogonal frequency division multiplexing power line—Communication physical layer specification
国家标准
GB/T 26594-2011
现行
无损检测仪器 工业用X射线管性能测试方法
Non-destructive testing instruments - Properties test methods of industrial X-ray tube
国家标准
GB/T 26802.1-2011
现行
工业控制计算机系统 通用规范 第1部分:通用要求
Industrial control computer system - General specification - Part 1: General requirements
地方标准
DB32/T 4743-2024
现行
重点化工企业全流程自动化控制配备和提升规范
国家标准
GB/T 34059-2017
现行
纳米技术 纳米生物效应代谢组学方法 核磁共振波谱法
Nanotechnology—Nanobiological effects of nanomaterials—NMR-based metabolomics
国家标准
GB/T 28473.2-2012
现行
工业过程测量和控制系统用温度变送器 第2部分:性能评定方法
Temperature transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance
国家标准
GB/Z 41285.1-2022
现行
无损检测仪器 密封放射性源技术应用射线防护规则 第1部分:γ射线机的固定和移动操作
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 1:Stationary and mobile handling for γ radiography
国家标准
GB/T 44935-2024
现行
纳米技术 二硫化钼薄片的层数测量 拉曼光谱法
Nanotechnologies—Measurement of the number of layers of MoS2 flakes—Raman spectroscopy method
地方标准
DB1304/T 459-2024
现行
锅炉安全隐患分类分级指南
国家标准
GB/T 36412-2018
现行
力标准机的检验与校准
Verification and calibration of force standard machines
国家标准
GB/T 31010-2014
现行
色散型高光谱遥感器实验室光谱定标
Spectral calibration in laboratory for dispersive hyperspectral sensor
国家标准
GB/T 26804.3-2011
现行
工业控制计算机系统 功能模块模板 第3部分:模拟量输入输出通道模板通用技术条件
Industrial control computer system - Function module - Part 3: General specification for analogue input/output channel module
国家标准
GB/T 26809-2011
现行
恒温槽与恒温循环装置 低温恒温循环装置
Thermostatic baths and circulators - Refrigerated circulators
国家标准
GB/T 21202-2018
现行
数字式多功能黑白静电复印(打印)设备
Digital multi-function monochrome electrostatic copying(printing) devices
国家标准
GB 43067-2023
现行
煤矿用仪器仪表安全技术要求
Technical requirements for safety of environmental monitoring instruments for coalmines
国家标准
GB/T 40305-2021
现行
现场设备集成 EDD与OPC UA集成技术规范
Field device integration—EDD and OPC UA integration technology specification
国家标准
GB/T 46573-2025
即将实施
工业镜头 分类与接口尺寸
Industrial lens—Classification and interface dimensions
国家标准
GB/T 42219-2022
现行
大功率LED的光学测量
Optical measurement of high-power LED
国家标准
GB/T 41273-2022
现行
生产过程质量控制 系统模型与架构 机械加工
Production process quality control—System model and architecture—Machining
国家标准
GB/T 41251-2022
现行
生产过程质量控制 生产装备全生命周期管理
Production process quality control—Life cycle management of production equipment
国家标准
GB/T 26156.1-2010
现行
工业过程测量和控制系统用智能调节器 第1部分:通用技术条件
Intelligent adjusters for industrial-process measurement and control systems - Part 1: General specification
国家标准
GB/T 32710.6-2016
现行
环境试验仪器及设备安全规范 第6部分:生物人工气候试验箱
Safety requirements for environmental testing and conditioning equipment—Part 6: Climatic chambers for biological application
国家标准
GB/T 19146-2010
现行
红外人体表面温度快速筛检仪
Infrared devices for instant screening of human skin temperature
国家标准
GB/T 13965-2010
现行
仪表元器件 术语
Instrument components - Vocabulary
国家标准
GB/T 36245-2018
现行
工业过程测量与控制仪表可靠性分配指南
Guide for reliability allocation of industrial process measurement and control instrument
国家标准
GB/T 25918-2010
现行
便携式水表校验仪
Portable calibration instrument for water meters
国家标准
GB/T 26793-2011
现行
库仑法微量水分测定仪
Coulometry micro water teller
国家标准
GB/T 27757-2011
现行
pH值测定用参比电极
Reference electrodes for the measurement of pH value
国家标准
GB/T 32268-2015
现行
十八烷基键合相(C18)高效液相色谱柱性能测定方法
Method of performance testing for octadecyl bonded(C18) high performance liquid chromatography(HPLC) column
地方标准
DB1304/T 506-2025
现行
矿用检测检验仪器设备管理规范
国家标准
GB/T 21637-2008
现行
冠状病毒透射电子显微镜形态学鉴定方法
Method of morphological identification of coronavirus by using transmission electron microscopy
国家标准
GB/T 36211.1-2018
现行
全分布式工业控制智能测控装置 第1部分:通用技术要求
Intelligent measuring and control device in full-distributed industrial control system—Part 1:General technical requirements
国家标准
GB/T 26804.4-2011
现行
工业控制计算机系统 功能模块模板 第4部分:模拟量输入输出通道模板性能评定方法
Industrial control computer system - Function module - Part 4: Methods of evaluating the performance for analogue input/output channel module
国家标准
GB/T 11828.1-2019
现行
水位测量仪器 第1部分:浮子式水位计
Instruments for stage measurement—Part 1:Float-type stage gauge
国家标准
GB/T 33886-2017
现行
无损检测仪器 工业电子内窥镜检测仪
Non-destructive testing instruments—Industrial electronic endoscopic detector
国家标准
GB/T 18312-2015
现行
双筒望远镜检验规则
Inspection rule for binoculars
国家标准
GB/T 42019-2022
现行
基于时间敏感技术的宽带工业总线AUTBUS 系统架构与通信规范
AUTBUS boradband industrial fieldbus based on time-sensitive technology—System architecture and communication specification
国家标准
GB/T 21116-2007
现行
液压振动台
Hydraulic vibration generator systems
国家标准
GB/T 21199-2024
现行
激光打印机用干式显影剂
Dry toner for laser printer
国家标准
GB/T 39115-2020
现行
过程自动化能效评估方法
Energy efficiency evaluation methods for process automation
国家标准
GB/T 38240-2019
现行
无损检测仪器 射线数字探测器阵列制造特征
Non-destructive testing instruments—Standard practice for manufacturing characterization of digital detector arrays
国家标准
GB/T 21638-2025
现行
微束分析 钢铁材料缺陷电子束显微分析方法通则
Microbeam analysis—Guidelines for electron beam microanalysis of defects in steel materials
国家标准
GB/T 29301-2024
现行
静电复印(包括多功能)设备用鼓粉盒
Toner cartridges for electrostatic copying(including multifunction)devices
国家标准
GB/Z 41285.6-2022
现行
无损检测仪器 密封放射性源技术应用射线防护规则 第6部分:γ射线机用可移动设备的检验、维护和功能检测
Non-destructive testing instruments—Radiation protection rules for the technical application of sealed radioactive sources—Part 6:Inspection,service and functional test of mobile apparatus for γ radiography
正在加载更多...
没有更多了...