GB/T 19889.3-2005 标准详情
GB/T 19889.3-2005
现行
声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 11826.2-2012
现行
流速流量仪器 第2部分:声学流速仪
Current meter and flow meter - Part 2: Ultrasonic current meter
国家标准
GB/T 15261-2008
现行
超声仿组织材料声学特性的测量方法
Measurement methods for acoustic properties of ultrasonically tissue-mimicking materials
行业标准
DL/T 2891-2025
现行
高压电气设备声学成像现场测试导则
国家标准
GB/T 16296.2-2016
现行
声学 测听方法 第2部分:用纯音及窄带测试信号的声场测听
Acoustics—Audiometric test methods—Part 2: Sound-field audiometry with pure-tone and narrow-band test signals
国家标准
GB/T 31004.2-2014
现行
声学 建筑和建筑构件隔声声强法测量 第2部分:现场测量
Acoustics―Measurement of sound insulation in buildings and of building elements using sound intensity―Part 2: Field measurements
国家标准
GB/T 18696.2-2002
现行
声学 阻抗管中吸声系数和声阻抗的测量 第2部分:传递函数法
Acoustics--Determination of sound absorption coefficient and impedance in impedance tubes--Part 2:Transfer function method
国家标准
GB/T 4760-1995
现行
声学 消声器测量方法
Acoustics--Measurement procedure for silencers
国家标准
GB/T 4130.1-2025
现行
声学 水听器校准 第1部分:自由场校准方法
Acoustics—Calibration of hydrophones—Part 1:Procedures for free-field calibration
国家标准
GB/T 4854.7-2008
现行
声学 校准测听设备的基准零级 第7部分: 自由场与扩散场测听的基准听阈
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
国家标准
GB/T 4854.5-2008
现行
声学 校准测听设备的基准零级 第5部分:8kHz-16kHz频率范围纯音基准等效阈声压级
Acoustics - Reference zero for the calibration of audiometric equipment- Part 5: Reference equivalent threshold sound pressure levels for pure tone in the frequency range 8 kHz to 16 kHz
国家标准
GB/T 3947-1996
现行
声学名词术语
Acoustical terminology
国家标准
GB/T 16296.1-2018
现行
声学 测听方法 第1部分:纯音气导和骨导测听法
Acoustics—Audiometric test methods—Part 1: Pure-tone air and bone conduction audiometry
国家标准
GB/T 19889.10-2006
现行
声学 建筑和建筑构件隔声测量 第10部分: 小建筑构件空气声隔声的实验室测量
Acoustics―Measurement of sound insulation in buildings and of building elements―Part 10:Laboratory measurements of airborne sound insulation of small building elements
团体标准
T/CDSA 305.24-2017
现行
水下平面与高程声学测量技术规程
Regulations for the acoustic survey of underwater plane and elevation
行业标准
SL 337-2006
现行
声学多普勒流量测验规范
国家标准
GB/T 4854.9-2016
现行
声学 校准测听设备的基准零级 第9部分:确定基准听阈级的优选测试条件
Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels
国家标准
GB/T 16296.3-2017
现行
声学 测听方法 第3部分:言语测听
Acoustics—Audiometric test methods—Part 3: Speech audiometry
国家标准
GB/T 35426.1-2017
现行
声学 动刚度测定 第1部分:普通浮筑楼板下的弹性材料
Acoustics—Determination of dynamic stiffness—Part 1: Materials used under floating floors in dwellings
国家标准
GB/T 6881-2023
现行
声学 声压法测定噪声源声功率级和声能量级 混响室精密法
Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Precision methods for reverberation test rooms
国家标准
GB/Z 21233-2007
现行
声学 应用社会调查和社会声学调查评价噪声烦恼度
Acoustics - Assessment of noise annoyance by means of social and socio-acoustics surveys
国家标准
GB/T 21228.2-2023
现行
声学 表面声散射特性 第2部分:自由场方向性扩散系数测量
Acoustics—Sound-scattering properties of surfaces—Part 2:Measurement of the directional diffusion coefficient in a free field
国家标准
GB/T 32523-2016
现行
声学 水声材料样品声压反射系数、声压透射系数和吸声系数的测量 行波管法
Acoustics—Measurement of sound pressure reflection coefficient, sound pressure transmission coefficient and absorption coefficient for underwater acoustical material sample—Travelling wave tube method
国家标准
GB/T 25079-2010
现行
声学 建筑声学和室内声学中新测量方法的应用 MLS和SS方法
Acoustics - Application of new measurement methods in building and room acoustics - MLS and SS methods
地方标准
DB41/T 1594-2018
现行
黄河河南段鱼类资源声学调查技术规范
国家标准
GB/T 5266-2006
现行
声学 水声材料纵波声速和衰减系数的测量 脉冲管法
Acoustics - Measurements of the longitudinal wave velocity and attenuation coefficient for underwater acoustical materials - Pulse tube method
国家标准
GB/T 8753.4-2005
现行
铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第4部分:酸处理后的染色斑点法
Anodizing of aluminium and aluminium alloys-assessment of quality of sealed anodic oxide coatings Part 4:Dye spot test with prior acid treatment