GB/T 33464-2016 标准详情
GB/T 33464-2016
现行
化学分析标准操作程序编写与使用指南
Guidelines for preparing and using standard operation procedures for chemical analysis
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 16477.3-2010
现行
稀土硅铁合金及镁硅铁合金化学分析方法 第3部分:氧化镁含量的测定 电感耦合等离子体发射光谱法
Chemical analysis methods of rare earth ferrosilicon alloy and rare earth ferrosilicon magnesium alloy - Part 3: Determination of magnesia content - Inductively coupled plasma atomic emission spectrometry
行业标准
YS/T 1200.2-2017
现行
1,1’-双二苯基膦二茂铁二氯化钯化学分析方法 第2部分:铅、镍、铜、镉、铬、铂、金、铑、铱量的测定 电感耦合等离子体原子发射光谱法
行业标准
YS/T 252.1-2007
现行
高镍锍化学分析方法 镍量的测定 丁二酮肟重量法
T/CNEA 249.5-2024
现行
核工业用锆及锆合金化学分析方法 第5部分:合金及杂质元素的测定?电感耦合等离子体原子发射光谱法
行业标准
YS/T 358.8-2011
现行
钽铁、铌铁精矿化学分析方法 第8部分:亚铁量的测定 重铬酸钾滴定法
国家标准
GB/T 42513.3-2023
现行
镍合金化学分析方法 第3部分:铝含量的测定 一氧化二氮-火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of nickel alloys—Part 3:Determination of aluminium content—Nitrous oxide- flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
行业标准
JB/T 7948.4-2017
现行
焊剂化学分析方法 第4部分:氧化铁含量测定
国家标准
GB/T 42513.1-2023
现行
镍合金化学分析方法 第1部分:铬含量的测定 硫酸亚铁铵电位滴定法
Methods for chemical analysis of nickel alloys—Part 1: Determination of chromium content—Potentiometric titration method with ammonium iron(II) sulfate
行业标准
YS/T 1379-2020
现行
纯铂化学分析方法 钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅含量的测定 电感耦合等离子体原子发射光谱法
国家标准
GB/T 11066.11-2021
现行
金化学分析方法 第11部分:镁、铬、锰、铁、镍、铜、钯、银、锡、锑、铅和铋含量的测定 电感耦合等离子体质谱法
Methods for chemical analysis of gold—Part 11:Determination of magnesium, chromium,manganese,iron,nickel,copper,palladium,silver,tin,antimony,lead and bismuth contents—Inductively coupled plasma mass spectrometry
国家标准
GB/T 14849.11-2016
现行
工业硅化学分析方法 第11部分:铬含量的测定 二苯碳酰二肼分光光度法
Methods for chemical analysis of silicon metal—Part 11:Determination of chromium content—1,5-Diphenylcarbohydrazide spectrophotometric method
行业标准
YS/T 423.4-2000
现行
核极碳化硼粉末化学分析方法 铁量的测定
行业标准
YS/T 445.16-2020
现行
银精矿化学分析方法 第16部分:氟和氯含量的测定 离子色谱法
国家标准
GB/T 223.77-1994
现行
钢铁及合金化学分析方法 火焰原子吸收光谱法测定钙量
Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrometric method for the determination of calcium content
国家标准
GB/T 20975.31-2019
现行
铝及铝合金化学分析方法 第31部分:磷含量的测定 钼蓝分光光度法
Methods for chemical analysis of aluminium and aluminium alloys—Part 31:Determination of phosphorus content—Molybdenum blue spectrophotometry
国家标准
GB/T 14352.19-2021
现行
钨矿石、钼矿石化学分析方法 第19部分:铋、镉、钴、铜、铁、锂、镍、磷、铅、锶、钒和锌量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of tungsten ores and molybdenum ores—Part 19:Determination of bismuth,cadmium,cobalt,copper,iron,lithium,nickel,phosphorus,lead,strontium,vanadium and zinc content—Inductive-coupled plasma atomic emission spectrophotometry(I
国家标准
GB/T 20255.6-2008
现行
硬质合金化学分析方法 火焰原子吸收光谱法 一般要求
Methods for chemical analysis of hardmetals - Flame atomic absorption spectrometry - General requirements
行业标准
YS/T 1395.1-2020
现行
二氯二氨钯化学分析方法 第1部分:钯含量的测定 水合肼还原重量法
国家标准
GB/T 4324.8-2008
现行
钨化学分析方法 镍量的测定 电感耦合等离子体原子发射光谱法、火焰原子吸收光谱法和丁二酮肟重量法
Methods for chemical analysis of tungsten - Determination of nickel content - The inductively coupled plasma atomic emission spectrometry 、 flame atomic absorption spectrometry and dimethylglyoxime gravimetry
国家标准
GB/T 8151.19-2012
现行
锌精矿化学分析方法 第19部分:金和银含量的测定 铅析或灰吹火试金和火焰原子吸收光谱法
Methods for chemical analysis of zinc sulfide concentrates - Part 19:Determination of silver and gold contents - Fire assay and flame atomic absorption spectrometric method using scorification or cupellation
国家标准
GB/T 5121.4-2008
现行
铜及铜合金化学分析方法 第4部分:碳、硫含量的测定
Methods for chemical analysis of copper and copper alloys - Part 4:Determination of carbon and sulfur content
国家标准
GB/T 22660.3-2008
现行
氟化锂化学分析方法 第3部分:氟含量的测定 蒸馏-硝酸钍容量法
Chemical analysis methods of lithium fluoride - Part 3: Determination of fluoride content - Distillation-thorium nitrate titration volumetric method
行业标准
YS/T 1116.1-2016
现行
锡阳极泥化学分析方法 第1部分:锡量的测定 碘酸钾滴定法
行业标准
YS/T 1380-2020
现行
铑化合物化学分析方法 氯离子、硝酸根离子含量的测定 离子色谱法
行业标准
JB/T 9493.7-1999
现行
锰铜和新康铜电阻合金化学分析方法 苯甲酸铵分离--EDTA滴定法测定铝量
国家标准
GB/T 27757-2011
现行
pH值测定用参比电极
Reference electrodes for the measurement of pH value