GB/T 1927.3-2021 标准详情
GB/T 1927.3-2021
现行
无疵小试样木材物理力学性质试验方法 第3部分:生长轮宽度和晚材率测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 3: Determination of the growth rings width and latewood rate of wood
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 16414-2008
现行
煤矿科技术语 岩石力学
Terms relating to coal mining - Rock mechanics
国家标准
GB/T 1927.17-2021
现行
无疵小试样木材物理力学性质试验方法 第17部分:冲击韧性测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength
行业标准
LY/T 3347-2023
现行
小径级圆竹物理力学性质试验方法
国家标准
GB/T 14410.5-2008
现行
飞行力学 概念、量和符号 第5部分:飞行测量
Flight mechanics - Concepts, quantities and symbols - Part 5: Flight measurements
国家标准
GB/T 14410.1-2008
现行
飞行力学 概念、量和符号 第1部分:坐标轴系和运动状态变量
Flight mechanics-Concepts, quantities and symbols Part 1: Axis systems and motion state variables
国家标准
GB/T 1927.14-2022
现行
无疵小试样木材物理力学性质试验方法 第14部分:顺纹抗拉强度测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 14: Determination of tensile strength parallel to grain
国家标准
GB/T 23561.4-2009
现行
煤和岩石物理力学性质测定方法 第4部分:煤和岩石孔隙率计算方法
Methods for determining the physical and mechanical properties of coal and rock - Part 4: Methods for calculating the porosity of coal and rock
国家标准
GB/T 40396-2021
现行
聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法(DMA)
Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis(DMA)
国家标准
GB/T 23561.16-2010
现行
煤和岩石物理力学性质测定方法 第16部分:岩石耐崩解性指数测定方法
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining slake durability index of rock
国家标准
GB/T 1927.8-2021
现行
无疵小试样木材物理力学性质试验方法 第8部分:湿胀性测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 8: Determination of swelling
国家标准
GB/T 23561.1-2024
现行
煤和岩石物理力学性质测定方法 第1部分:采样一般规定
Methods for determining the physical and mechanical properties of coal and rock—Part 1: General requirements for sampling
国家标准
GB/T 24496-2009
现行
钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels - Laboratory mechanical tests - Effect of tangential loading
国家标准
GB/T 45017-2024
现行
超疏水表面的力学稳定性测试方法
Test method for mechanical stability of superhydrophobic surfaces
国家标准
GB/T 23561.2-2009
现行
煤和岩石物理力学性质测定方法 第2部分:煤和岩石真密度测定方法
Methods for determining the physical and mechanical properties of coal and rock - Part 2: Methods for determining the true density of coal and rock
国家标准
GB/T 23561.3-2009
现行
煤和岩石物理力学性质测定方法 第3部分:煤和岩石块体密度测定方法
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the block density of coal and rock
行业标准
YS/T 3011-2012
现行
黄金矿开采工程岩石物理力学性质试验技术规范
国家标准
GB/T 1927.2-2021
现行
无疵小试样木材物理力学性质试验方法 第2部分:取样方法和一般要求
Test methods for physical and mechanical properties of small clear wood specimens—Part 2: Sampling methods and general requirements
国家标准
GB/T 1927.16-2022
现行
无疵小试样木材物理力学性质试验方法 第16部分:顺纹抗剪强度测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 16: Method of testing in shearing strength parallel to grain of wood
国家标准
GB/T 1927.18-2021
现行
无疵小试样木材物理力学性质试验方法 第18部分:抗冲击压痕测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 18: Determination of resistance to impact indentation
行业标准
SY/T 7617-2021
现行
海相页岩地质力学评价规范
T/UNP 525-2025
现行
安全工器具综合力学试验系统技术规范
Technical specification for comprehensive mechanical testing system of safety tool and instrument
行业标准
NB/T 20725-2024
现行
核电厂承压设备概率断裂力学评价方法
国家标准
GB/T 1927.15-2022
现行
无疵小试样木材物理力学性质试验方法 第15部分:横纹抗拉强度测定
Test methods for physical and mechanical properties of small clear wood specimens—Part 15: Determination of tensile strength perpendicular to grain
国家标准
GB/T 14410.8-2009
现行
飞行力学 概念、量和符号 第8部分:飞机动态特性
Flight dynamics - Concepts, quantities and symbols - Part 8: the dynamic behavior of the aircraft
T/ZSM 0085-2025
现行
真空光阱测量系统 力学测量灵敏度与分辨率测试方法
国家标准
GB/T 21944.3-2022
现行
碳化硅特种制品 反应烧结碳化硅窑具 第3部分:辊棒
Special products of silicon carbide—Kiln furniture of reaction bonded silicon carbide—Part 3:Rollers