GB/T 13748.10-2013 标准详情
GB/T 13748.10-2013
现行
镁及镁合金化学分析方法 第10部分:硅含量的测定 钼蓝分光光度法
Chemical analysis methods of magnesium and magnesium alloys - Part 10:Determination of silicon content - Molybdenum blue spectrophotometric method
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 22571-2017
现行
表面化学分析 X射线光电子能谱仪 能量标尺的校准
Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales
行业标准
YS/T 239.3-2010
现行
三硫化二锑化学分析方法 第3部分:游离硫量的测定 燃烧中和滴定法
团体标准
T/AHEMA 13-2022
现行
检验检测机构化学分析滴定操作规程
Operation Specification in Chemical Titration Analysis?For Inspection and Testing Organization
国家标准
GB/T 42360-2023
现行
表面化学分析 水的全反射X射线荧光光谱分析
Surface chemical analysis—Total reflection X-ray fluorescence analysis of water
国家标准
GB/T 18115.2-2020
现行
稀土金属及其氧化物中稀土杂质化学分析方法 第2部分:铈中镧、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定
Chemical analysis methods of rare earth impurities in rare earth metals and their oxides—Part 2: Determination of lanthanum, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yt
行业标准
YS/T 775.4-2011
现行
铅阳极泥化学分析方法 第4部分:锑量的测定 火焰原子吸收光谱法和硫酸铈滴定法
行业标准
SN/T 3318.2-2015
现行
锆英砂化学分析方法 第2部分:锆、铁、钛含量的测定 波长色散X射线荧光光谱法
国家标准
GB/T 10574.10-2017
现行
锡铅焊料化学分析方法 第10部分:镉量的测定 火焰原子吸收光谱法和Na2EDTA滴定法
Methods for chemical analysis of tin-lead solders—Part 10:Determination of cadmium content—Flame atomic absorption spectrometry and Na2EDTA titration method
国家标准
GB/T 16537-2010
现行
陶瓷熔块釉化学分析方法
Chemical analysis methods of fritted glaze for ceramics
国家标准
GB/T 3260.5-2013
现行
锡化学分析方法 第5部分:锑量的测定 孔雀绿分光光度法
Methods for chemical analysis of tin―Part 5:Determination of antimony content―The malachite green photometric method
国家标准
GB/T 23274.2-2009
现行
二氧化锡化学分析方法 第2部分:铁量的测定 1,10-二氮杂菲分光光度法
Methods for chemical analysis of stannic oxide - Part 2: Determination of iron content - 1,10-phenanthroline photometric method
行业标准
SN/T 1031.7-2003
现行
进出口粗氧化锑化学分析方法砷含量的测定
国家标准
GB/T 6609.8-2004
现行
氧化铝化学分析方法和物理性能测定方法 二苯基碳酰二肼光度法测定三氧化二铬含量
Chemical analysis methods and determination of physical performance of alumina--Determination of chromium sesquioxide content--Diphenyl carbazide photometric method
国家标准
GB/T 8151.4-2012
现行
锌精矿化学分析方法 第4部分:二氧化硅量的测定 钼蓝分光光度法
Methods for chemical analysis of zinc concentrates - Part 4: Determination of silicon dioxide content - Molybdenum blue spectrophotometry
国家标准
GB/T 22660.8-2008
现行
氟化锂化学分析方法 第8部分:硫酸根含量的测定 硫酸钡重量法
Chemical analysis methods of lithium fluoride - Part 8: Determination of sulphate content - Barium sulphate gravimetric method
行业标准
YS/T 715.4-2009
现行
二氧化硒化学分析方法 第4部分:灼烧残渣的测定 重量法
国家标准
GB/T 4372.5-2014
现行
直接法氧化锌化学分析方法 第5部分:锰量的测定 火焰原子吸收光谱法
Methods for chemical analysis of zinc oxide produced by direct process―Part 5:Determination of manganese content―Flame atomic absorption spectrometry method
国家标准
GB/T 5484-2024
现行
石膏化学分析方法
Methods for chemical analysis of gypsum
国家标准
GB/T 34609.2-2020
现行
铑化合物化学分析方法 第2部分:银、金、铂、钯、铱、钌、铅、镍、铜、铁、锡、锌、镁、锰、铝、钙、钠、钾、铬、硅含量的测定 电感耦合等离子体原子发射光谱法
Method for chemical analysis of rhodium compounds—Part 2: Determination of silver,gold,platinum,palladium,iridium,ruthenium,lead,nickel,copper,iron,tin,zinc,magnesium,manganese,aluminium,calcium,sodium,potassium,chromium and silicon contents—Inductively c
国家标准
GB/T 6150.3-2023
现行
钨精矿化学分析方法 第3部分:磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法
Methods for chemical analysis of tungsten concentrates—Part 3: Determination of phosphorus content—The phosphorus molybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry
行业标准
YS/T 514.4-2009
现行
高钛渣、金红石化学分析方法 第4部分:二氧化硅量的测定 称量法、钼蓝分光光度法
行业标准
YS/T 574.1-2009
现行
电真空用锆粉化学分析方法 重量法测定总锆及活性锆量
国家标准
GB/T 15072.1-2008
现行
贵金属合金化学分析方法 金、铂、钯合金中金量的测定 硫酸亚铁电位滴定法
Test method of precious alloys - Determination of gold content for gold, platinum and palladium alloys - Potentiometric titration using ferrous sulfate
国家标准
GB/T 1819.2-2004
现行
锡精矿化学分析方法 锡量的测定 碘酸钾滴定法
Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method
行业标准
YS/T 514.5-2009
现行
高钛渣、金红石化学分析方法 第5部分:氧化铝量的测定 EDTA滴定法
国家标准
GB/T 4893.6-2013
现行
家具表面漆膜理化性能试验 第6部分:光泽测定法
Test of surface coatings of furniture - Part 6:Determination of gloss value