GB/T 17006.8-2003 标准详情
GB/T 17006.8-2003
现行
医用成像部门的评价及例行试验 第2-9部分: 稳定性试验 间接透视和间接摄影X射线设备
Evaluation and routine testing in medical imaging departments--Part 2-9: Constancy tests--Equipment for indirect radioscopy and indirect radiography
标准内容导航
标准状态
标准信息
相似标准推荐
国家标准
GB/T 10125-2021
现行
人造气氛腐蚀试验 盐雾试验
Corrosion tests in artificial atmospheres—Salt spray tests
行业标准
JB/T 4279.2-2008
现行
漆包绕组线试验仪器设备检定方法 第2部分:直流电阻试验装置
国家标准
GB/T 17980.136-2004
现行
农药 田间药效试验准则(二) 第136部分:烟草抑芽剂试验
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 136:Restrain shoot medicament trials on tobacoo
行业标准
YS/T 3022-2013
现行
含金矿石全泥氰化浸金试验技术规范
行业标准
DL/T 474.3-2018
现行
现场绝缘试验实施导则 介质损耗因数tanδ试验
国家标准
GB/T 17626.16-2007
现行
电磁兼容 试验和测量技术 0Hz~150kHz共模传导骚扰抗扰度试验
Electromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted,common mode disturbances in the frequency range 0Hz to 150kHz
行业标准
DL/T 749-2001
现行
除灰系统试验规程
行业标准
JB/T 3596-2017
现行
射水抽气器 性能试验规程
国家标准
GB/T 17626.4-2018
现行
电磁兼容 试验和测量技术 电快速瞬变脉冲群抗扰度试验
Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test
行业标准
YY/T 0879.1-2013
现行
医疗器械致敏反应试验 第1部分:小鼠局部淋巴结试验(LLNA)放射性同位素掺入法
地方标准
DB61/T 999.3-2015
现行
保健用品功能学评价指导原则及试验要求 第3部分:改善微循环类功能学评价人体试验
行业标准
SH/T 0083-1991
现行
防锈油耐候试验法
行业标准
DL/T 244-2012
现行
直接空冷系统性能试验规程
国家标准
GB/T 17215.221-2021
现行
电测量设备(交流) 通用要求、试验和试验条件 第21部分:费率和负荷控制设备
Electricity metering equipment(a.c.)—General requirements, tests and test conditions—Part 21:Tariff and load control equipment
行业标准
YY/T 1500-2016
现行
医疗器械热原试验 单核细胞激活试验 人全血ELISA法
国家标准
GB/T 20121-2006
现行
金属和合金的腐蚀 人造气氛的腐蚀试验 间歇盐雾下的室外加速试验(疮痂试验)
Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
行业标准
DL/T 1399.5-2022
现行
电力试验/检测车 第5部分:电力变压器局部放电试验车
国家标准
GB/T 17626.5-2019
现行
电磁兼容 试验和测量技术 浪涌(冲击)抗扰度试验
Electromagnetic compatibility—Testing and measurement techniques-Surge immunity test
行业标准
JB/T 6214-2014
现行
仪器仪表可靠性验证试验及测定试验(指数分布)导则
国家标准
GB/T 5169.19-2022
现行
电工电子产品着火危险试验 第19部分:非正常热 模压应力释放变形试验
Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test
国家标准
GB/T 21000.1-2007
现行
商用冷藏柜 试验方法 第1部分:通用试验条件及温度试验
Commercial refrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test
国家标准
GB/T 6466-2008
现行
电沉积铬层 电解腐蚀试验(EC试验)
Electrodeposited chromium coatings - Electrolytic corrosion testing (EC test)
国家标准
GB/T 17626.28-2006
现行
电磁兼容 试验和测量技术 工频频率变化抗扰度试验
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Variation of power frequency,immunity test
国家标准
GB/T 38265.17-2022
现行
软钎剂试验方法 第17部分:钎剂残留物的表面绝缘电阻梳刷试验和电化学迁移试验
Test methods for soft soldering fluxes—Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues
行业标准
DL/T 474.5-2018
现行
现场绝缘试验导则 避雷器试验
国家标准
GB/T 19290.2-2003
现行
发展中的电子设备构体机械结构模数序列 第2部分: 分规范 25 mm设备构体的接口协调尺寸
Modular order for the development of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice